UK-POLOS.NET - THE VW Polo Forum

Take your car to a VW workshop asap to check if your car is subject to the recall action for the variable timing gear. Many exemplars of 1.2 TSI EA211 belt driven engines of 2014-2015 production mount a defective variable timing gear which causes the rattle at cold start-up and could also potentiall...

Thank you for the answer!
I was considering this upgrade, but then I realized all these things, plus the fact that vented discs weigh more than solid ones.
I think I'm staying with 232mm on the rear, since I'm not a track driver.

Inviato dal mio MHA-L09

Is it worth it?
I mean: do the vented discs radically change the brakes performance and resistance to fade, considering that the front brakes do almost the 70% of the work?
Or is just an aesthetic upgrade?

Inviato dal mio MHA-L09

If you hear the noise only when you don't press the clutch pedal and it immediately disappears when you press it, I'd think about a flywheel problem.

Inviato dal mio MHA-L09

Everything will work properly, :arrow: but you have to keep this in mind . You can use this guide to install the two cables you need (+15 & Lin) I recommend this way, it's easier. :arrow: https://drive.google.com/file/d/0B2nv91Y7YYCbVnpoRHFqU1BRVGM/view?usp=sharing Thank you so much! Everything...

Hi Ciclo, is the 6C steering wheel a direct install on 6R? Or is it necessary to change some wirings/connectors/etc.? At the moment I'm desperately searching for a multifunction steering wheel for my 6R HighLine M.Y.2010. At the start I was looking for the 6R steering type (the one you had before),...

New mod - MFSW Polo 6C R-line 1K8419091 AP - Airbag 5G0 880 201 J http://i18.servimg.com/u/f18/18/94/39/39/013.jpg http://i18.servimg.com/u/f18/18/94/39/39/113.jpg http://i18.servimg.com/u/f18/18/94/39/39/213.jpg http://i18.servimg.com/u/f18/18/94/39/39/314.jpg http://i18.servimg.com/u/f18/18/94/39...

Thank you so much, firegrafik!
You already explained to me many things on drive2.ru, but with this last post you really made it complete! It really helped me to understand how the ABS Unit coding works.


Inviato dal mio LG-D802

It sounds like some ABS valves enter in function when not needed. How the brakes perform if you hardly stop from 100km/h to 0km/h? Does the ABS work properly? Check all the brakes hoses: they could be damaged and create a problem with the internal pressure of the brake circuit, causing the ABS to no...

be aware that there is a difference in coding for ESP 8.2 and ESP 9.0 for example, polo Blue GT 2014 Coding: 21 DD 48 85 43 27 00 C9 84 1C 12 72 C2 54 00 55 09 05 polo 1.2 turbo 2012 Coding: 21 02 48 E3 41 6F 00 B7 84 2B 12 E7 82 D5 00 52 13 00 Yes, many bytes change from Bosch 8.2i to Bosch 9.0i, ...

Correct ABS coding for 312mm front and 232mm rear:
Byte 2 "68" - Byte10 "16"

Inviato dal mio LG-D802

You are wlecome! You need to change the hubs, because with 256mm front discs the caliper-carriers are integrated in the hubs. 288mm front discs require Lucas or ATE FN3 calipers with a caliper-carriers separated from the hubs. It's not a cheap upgrade, but I can tell you it's worth it! I did it and ...

Well, I figured out most of it! Front 256mm - Rear drums: Byte 2 "24" - Byte 10 "24" Front 256mm - Rear 232mm: Byte 2 "28" - Byte 10 "14" Front 288mm - Rear 232mm: Byte 2 "48" - Byte 10 "12" Front 288mm - Rear drums: Byte 2 "44" -...

Thank you for the explanation, ilchel!
What can I do to make the right coding accepted?
It keeps rejecting it...

Inviato dal mio LG-D802

I tried to modify one bit at a time, but the coding is always rejected..

Could it mean the coding I have now is wrong even if it was accepted (2 years ago)?

Inviato dal mio LG-D802