UK-POLOS.NET - THE VW Polo Forum

7C8829F88861010001200EF06EEB9EC85BC062FF608D30C1200000030000 Light switch position. - 0 = LED full brightness + front parking full power, rear parking and backlight of the plate is off, No backlight of indicators (clocks) - AUTO: Full LED brightness + parking lights, front dimmed, low beam, board ba...

We are unlikely to come to the color of the cables because it did not have such long cables and made a 2-cable bridge

It seems that someone did not follow my instructions precisely.😄 I wonder why people think that things work with the logic that they think it is? When an electronic component is inserted in the electrical operation of components (in this case a NEW BCM) anything is possible without the usual logic ...

Due to the shortage of time today (wiring installation + gluing the seat heating mats) I was able to take a photo of the headlamp plugs, tomorrow I will make an UPDATE and upload a photo of the BCM plugs (A, B) On encoding: 7C8829F88861010001200EF06EEB9EC85FC067FF608D30C1200000030000 The AUTO option...

Do not worry, once you take photos from the connectors/wires that I said in one of my previous posts and post a "NEW" autoscan (after doing the photos), I will tell you what you have to do, it will be very easy for you, ...nothing to worry about. Ok Cyclo, thank you, then on Sunday 14.11 ...

Some information: Well, after the tests that we have previously carried out and viewing some reviews on YouTube for Seat Ibiza 2016 (6P PQ26) with halogen headlights, we can know that the small LED module/v-strip for DRLs integrated in the halogen headlight does not have the dimming capacity . It j...

Apparently, there are wires in other colors, but it will turn out when I pick up the car , Saturday or Sunday I will take a day off at work and check, the problem in your opinion lies only in the bcm wires -> lamps or something else? I am going to go through the entire installation that he added / c...

I have a feeling that the procedures are not being carried out the right way. Installation and coding are paired in a deep love, if any change is made in the electrical installation it must also be done in the coding. I think the real problem is that there are three of us involved in this story, an...

ciclo wrote: ↑Wed Nov 10, 2021 1:14 pm Due to the behavior of the lights, it seems that, maybe, the two new cables that go to each headlight have been swapped of position in the T10 connector.

By replacing the cables T10 / 4 -> T10 / 10. LED lights + dimmed parking, parking with full power, the LED does not light at all

ciclo wrote: ↑Wed Nov 10, 2021 1:04 pm What is the operation of your rear Parking lights in these conditions ...

Rear parking lights sparkle at full power

ciclo wrote: ↑Wed Nov 10, 2021 1:14 pm Due to the behavior of the lights, it seems that, maybe, the two new cables that go to each headlight have been swapped of position in the T10 connector.

I do not have physical access to the car, the electrician says that when I replace the cables, the DRL goes out and throws an error

ciclo wrote: ↑Wed Nov 10, 2021 1:20 pm It is impossible to understand with total clarity the images if you do not add a comment with each one of them.
I am not an expert on halogen headlights, and even less so on SEAT halogen headlights.

1.3 position 0


2 parking position

But, what BCM coding are you referring to? Maybe it is better that you take pictures in a garage and in daylight conditions, because due of how your 6P halogen headlights with LED drl are built, it is possible that everything is working well... Please show with pictures what's the problem. Make a c...

But, what BCM coding are you referring to? Maybe it is better that you take pictures in a garage and in daylight conditions, because due of how your 6P halogen headlights with LED drl are built, it is possible that everything is working well... Please show with pictures what's the problem. Make a c...

.