UK-POLOS.NET - THE VW Polo Forum

Hello,

Anyone know where the rear window fuse and relay are?
I can´t find this two parts in the Fuse and Relay overview.

Hi together, it should be a common VW problem over years that after a while the backrest of the front seats starts to wobble. Only the backrest is wobbling, the ground where your ass is does not whobble. As I informed myself, it does not matter, if it is a 3-door verion or a 5-door version. So it do...

Hi together, I need the cover for the Luggage Compartment for the Polo 6R (No 6R6 867 769 B). Does somebody know if another cover, for example from Seat Ibiza, fits into the Polo 6R? Or is it just the one part for the Polo 6R? Thanks. https://i.ibb.co/ySQS2B6/3d19bd3e-a796-4c3b-b8cd-640d68b34fbb.jpg

Thanks again for the help. My horn is still working. I don't know what the problem was.

Srr. my Horn is working again. But I do not know why. I will write in 6 weeks to this post if it is still working. I think it is just a random effect. What are you measuring, under load as said earlier, on the pin that goes from the fuse to the BCM? T73a/73? The horn was pluged off. I was measuring ...

Thaks for the answer. Did you measure continuity of the wire, any short to plus and short to GND? No, if I measure between the two cables of the horn(brown and a black/ yellow one), I measure infinity Ohm. To the brown one ond GND of the cehicle 0 Ohm. Is the fuse OK? Fuses ar both fine. The fuse fo...

Just because you measure 12v doesn't necessarily mean that the wire is ok. You should load test your wire to assure that the wire is capable of carrying the current. You can try to connect a 15 or 21 watt light bulb to the horn connector. It seems that you are right. One more question: The red mark...

I think you are right. Is it a default problem at the 6R, a special corner, where the cable bricks?

Thanks for the answers. One more question: The Facts again: 1. Both horns are working if I connect them with seperate cables directly to the battery. 2. I am measuring at the two cables for the horn +12V if I press the button for the horn and ground always. 3. If the horn is connected normally to th...

Hey guys, I have a question to the horn: Is it in every model of the Polo 6R ground-switched? Or are existing exceptions? My Problem: - Fuses are fine also the wish-water fuse - Horn is working, if I connect it directly to the battery - The Relay in the Interiour is clicking by pushing the horn - I ...

Hello together,
can someone please post a assigment plan of the Fuse-Box?
Vehicle: Polo 6R BiFuel 1.4
Thanks.

It is a China-Clone. This is the reason why I never connected the PC to the Internet.

Hi guys, I bought years ago a USB/OBD Cable for VCDS Ross Tech v17. I am using it with an old PC which was never connected to the Internet. Since yesterday I am only able to connect to old cars without CAN. The testing function in VCDS shows me the information "CAN not ready". What is your...

Thank you guys. It's working now. I assembled it now to pin 24 at the ECU.

Greeting to the Netherlans and Spain

Did you also put a wire into the engine control unit? Yes. Here are the fault codes: The Engine: Friday,06,August,2021,09:48:26:39744 VCDS Version: Release 17.1.3 Running on Windows 7 x86 www.Ross-Tech.com Address 01: Engine Labels: None Control Module Part Number: 03C 906 024 CM HW: 03C 906 024 BH...