UK-POLOS.NET - THE VW Polo Forum

im running a king regulator, there not to expensive, about £30 and its adjustable.
Bike carbs get rid of the standard fuel injection and intake so no need for remapping or anything. You can get a programable ignition but its alot of money.

cheers bike carbs give a very good increase in performance compared to cost, you can spend £300 on an exhaust system but bike carbs give a much bigger gain. i made the manifold myself so only cost was for material, about £15, bogg bros make them for under £200, then all is needed is a T piece, fu...

sheer madness. All the work on the car was done by myself and my dad. I made the inlet manifold as a d.t a level project. I did it because i enjoy it and really cant afford to buy a faster car, saying that all the money i spent on this one could have had one. It runs really well, havent had it on th...

interested for sure

i will do eventually, after christmas

ja still available, £40

£60

£50 for seats, doorcards and carpet

Seats are height adjustable and in good nik, only two small fag burns on the rear bench but hardly noticable offers around £60 http://i2.photobucket.com/albums/y37/ben_champion/breaking016.jpg http://i2.photobucket.com/albums/y37/ben_champion/breaking023.jpg http://i2.photobucket.com/albums/y37/ben...

Sport raider alloys, similar to the 6n option wheels? a few marks on them as shown in the pictures with good tyres, 175/65/13 2x pirelli p3000, a continental (showing age, cracks) and a good year http://i2.photobucket.com/albums/y37/ben_champion/breaking012.jpg http://i2.photobucket.com/albums/y37/b...

load of rubbish, been on my car quite a while and theres no problem, the duration isnt long enough to cause the valves to hit the pistons if its timed correctly

it shouldnt damage the valves, i dont think the lift is any higher as the lobes look the same, but i didnt measure. It just has a longer duration. bit more in depth guide but it is off the top of my head jack the car up on the offside, remove the front wheel and the cover on the bottom of the arch. ...

Quinn direct = £0
6n lowered on alloys, all i had to do was fill out a engineers report form and get it stamped by an approved garage

me polo

yep turned the engine over by hand before starting, i ran it and all seemed fine but i still had the ignition timing on the standard position. it was abit of luck as the belt timing was spot on first time! Didn't use the trick with the long screwdriver throught the spark-plug-hole? With that you ca...