wanting to pop my door card off on monday, and im still waiting for the haynes manual i bought from the bay
i saw a really basic post about it, i think someone said u pop your handle off with a screw driver and then pop some clips out?
i dont really wanna wreck my doorcard/ handle by trying to prize bits off with a screwdriver, would someone mind giving me a reasonably detailed explanation or if anyone has and pics or guides?
thanks guys!
door card removal 6n
-
- Silver Member
- Posts: 309
- Joined: Wed Feb 20, 2008 5:03 pm
- Location: Basically Dartmoor, Devon
done this countless times on both sides
first off, take a small flat head screwdriver and prise the front off the grab handle.
beneath here are 2 circular recesses with philips head screws in. remove these.
unscrew the door pin at the top so you can get the door card off all the way!
then just use the grab handle and pull. little teasing around the edges helps, and don't be too brutal or you'll rip off the clips. couple missing on mine cos of this....
unclip the leccy bits (speaker wiring, leccy mirrors etc.) and it'll come completely free.
reverse it to put the card back on.
hope this helps mate
first off, take a small flat head screwdriver and prise the front off the grab handle.
beneath here are 2 circular recesses with philips head screws in. remove these.
unscrew the door pin at the top so you can get the door card off all the way!
then just use the grab handle and pull. little teasing around the edges helps, and don't be too brutal or you'll rip off the clips. couple missing on mine cos of this....
unclip the leccy bits (speaker wiring, leccy mirrors etc.) and it'll come completely free.
reverse it to put the card back on.
hope this helps mate