1.4 16v polo - 1.6 16v lupo gti

[sean.cartwright]

So ive got the complete engine, loom and ecu. Planning on using the gearbox and clutch off my 1.4. As
Was hoping i could use the cat off my 1.4 but realised the gti down pipe contains the lamba sensor.
I work as a mechanic but mainly porsches and done alot on fords if anyone can give some advise muchly appreciated

[alexperkins]

You'll need the right cat setup for the GTI engine. The bore is larger and the sensor setup is different

Pretty sure the clutch plate is larger too

[sean.cartwright]

Clutch on my 16v in 200mm same as the gti lump did mine 2 month ago. The loom was my major concern going to weld my cat onto the gti down pipe temporary repair till I decat the car. The mechanical aspects straight forward enough. Need vag com to code the throttle body when ive built it. If i need to swap the complete loom i will just didnt want to get it built and it not run