Hello!
Have anyone here put a Golf GTI Mk3-engine (16v 2-liters with 150 hp) in a Polo Mk4?
Seat Ibiza Gti have that engine and the engine bay are the same as Polo Mk4 i belive...
Someone here who knows the truth?
Put a Golf-engine in a Polo Mk4
- coupechamp
- Getting There!
- Posts: 62
- Joined: Sun Sep 21, 2008 9:47 pm
- Location: Northampton
Hi all, i know it's a bit different, but i have an 04 Polo with basically a Golf engine in it.... The bottom end is a 1.8T block without the turbo and the head is a 20v Golf head.
It has mk4 Golf front hubs, bigger flanges on the box to run the bigger drive shafts. Brembo GT Tourismo big brake kit, again to fit a Golf. The car is 210bhp,
which is not bad for a normally aspirated engine.
I now have to come clean, it runs in the VW-Racing Cup, and when i sort it out, i will get some pics on here. By the way this doesnt have a sub frame, just three mounts, (solid, made special,
so as to lower the engine as well as take all the stress of racing). Plus it runs a 6 speed Golf/Lupo Gti box.
Thanks, Doug
It has mk4 Golf front hubs, bigger flanges on the box to run the bigger drive shafts. Brembo GT Tourismo big brake kit, again to fit a Golf. The car is 210bhp,
which is not bad for a normally aspirated engine.
I now have to come clean, it runs in the VW-Racing Cup, and when i sort it out, i will get some pics on here. By the way this doesnt have a sub frame, just three mounts, (solid, made special,
so as to lower the engine as well as take all the stress of racing). Plus it runs a 6 speed Golf/Lupo Gti box.
Thanks, Doug
Last edited by coupechamp on Wed Oct 08, 2008 7:29 pm, edited 3 times in total.
- coupechamp
- Getting There!
- Posts: 62
- Joined: Sun Sep 21, 2008 9:47 pm
- Location: Northampton
- coupechamp
- Getting There!
- Posts: 62
- Joined: Sun Sep 21, 2008 9:47 pm
- Location: Northampton
- coupechamp
- Getting There!
- Posts: 62
- Joined: Sun Sep 21, 2008 9:47 pm
- Location: Northampton
whoops, some pics went of to one side, just scroll across, the pics with no front are current, as i get it ready for the last race of the year at Donington, Oct 10/11/12th.
Currently awaiting parts from the States to rebuild the 6 speed box, the one on the floor is a Ibiza Cupra box which went in but was found to be well of with the ratios due to the fact i run a 17" rim as apposed to the 13" the car ran on in South Africa, which is where we got it from.
I laugh now but that box with it's current gearing when i worked out the ratios the other day would of had a top speed of 174Mph, which is no doubt why i couldnt get past 3rd gear at Silverstone!!! hindsight is a wonderful thing.....
Currently awaiting parts from the States to rebuild the 6 speed box, the one on the floor is a Ibiza Cupra box which went in but was found to be well of with the ratios due to the fact i run a 17" rim as apposed to the 13" the car ran on in South Africa, which is where we got it from.
I laugh now but that box with it's current gearing when i worked out the ratios the other day would of had a top speed of 174Mph, which is no doubt why i couldnt get past 3rd gear at Silverstone!!! hindsight is a wonderful thing.....
Last edited by coupechamp on Wed Oct 08, 2008 7:30 pm, edited 1 time in total.
- coupechamp
- Getting There!
- Posts: 62
- Joined: Sun Sep 21, 2008 9:47 pm
- Location: Northampton
- coupechamp
- Getting There!
- Posts: 62
- Joined: Sun Sep 21, 2008 9:47 pm
- Location: Northampton