What 1.8t

revolutionrock · Post by **revolutionrock** » Fri Jul 10, 2009 1:12 pm

Need some advice on what 1.8t to use and what gearbox???

Frome a passat 2003?

Torq-Al · Post by **Torq-Al** » Fri Jul 10, 2009 4:05 pm

You'd stuggle with a Passat engine, as its longitudenally mounted in the car. A golf engine is transverse & what u'd want. Too many brackets, hoses, manifold etc to find if you got a Passat engine.

chewy · Post by **chewy** » Sat Jul 11, 2009 3:26 pm

What car do you have?

revolutionrock · Post by **revolutionrock** » Sun Jul 12, 2009 9:45 am

Torq-Al wrote:You'd stuggle with a Passat engine, as its longitudenally mounted in the car. A golf engine is transverse & what u'd want. Too many brackets, hoses, manifold etc to find if you got a Passat engine.

You can get a passat engien that is horizontal mounted.... The car is a 6n2

chewy · Post by **chewy** » Sun Jul 12, 2009 10:54 pm

An old shape s3 or tt.

Look for a bam engine code

Tim_GTi · Post by **Tim_GTi** » Wed Jul 15, 2009 5:11 pm

Aye, the BAM engine is the most power to come out of the factory.

revolutionrock · Post by **revolutionrock** » Fri Jul 17, 2009 12:22 am

There is a seat whit a 1.8t? am I right? Any other models?

Tim_GTi · Post by **Tim_GTi** » Fri Jul 17, 2009 3:39 pm

revolutionrock wrote:There is a seat whit a 1.8t? am I right? Any other models?

yep, mark 3 ibiza cupra

Torq-Al · Post by **Torq-Al** » Fri Jul 17, 2009 9:03 pm

Tim_GTi wrote:
revolutionrock wrote:There is a seat whit a 1.8t? am I right? Any other models?
yep, mark 3 ibiza cupra

And the Leon. (180bhp). BAM engine is the audi TT engine. (225bhp)

revolutionrock · Post by **revolutionrock** » Sat Jul 18, 2009 6:41 pm

How have they done whit the drive shafts? make new?i think the easiest way would be to make new ones?

Torq-Al · Post by **Torq-Al** » Sat Jul 18, 2009 8:20 pm

revolutionrock wrote:How have they done whit the drive shafts? make new?i think the easiest way would be to make new ones?

Just found some info that will make your life easy! Use an Ibiza Cupra gearbox & driveshafts for ease of transplant.

Then you'll need to make custom engine mounts to enable you to put your choice of 1.8T in.

Apparently if you go on club-polo & search for ash's polo you'll find some useful info.

revolutionrock · Post by **revolutionrock** » Sun Jul 19, 2009 2:51 pm

Torq-Al wrote:
revolutionrock wrote:How have they done whit the drive shafts? make new?i think the easiest way would be to make new ones?
Just found some info that will make your life easy! Use an Ibiza Cupra gearbox & driveshafts for ease of transplant.

Then you'll need to make custom engine mounts to enable you to put your choice of 1.8T in.

Apparently if you go on club-polo & search for ash's polo you'll find some useful info.

How wide is the axle track on a ibiza?
(Im gona googel it

)

Torq-Al · Post by **Torq-Al** » Sun Jul 19, 2009 7:34 pm

revolutionrock wrote:
Torq-Al wrote:
revolutionrock wrote:How have they done whit the drive shafts? make new?i think the easiest way would be to make new ones?
Just found some info that will make your life easy! Use an Ibiza Cupra gearbox & driveshafts for ease of transplant.

Then you'll need to make custom engine mounts to enable you to put your choice of 1.8T in.

Apparently if you go on club-polo & search for ash's polo you'll find some useful info.
How wide is the axle track on a ibiza?
(Im gona googel it )

Should be same as a Polo, think it's same floorpan, or very close!?

revolutionrock · Post by **revolutionrock** » Wed Aug 19, 2009 9:28 pm

I'm really interested to know more about drive shaft, I have look on a golf mk4 gearbox.
make new drive shafts is expensive!

Any one know/or have done it, how did you do whit the drive shafts?

UK-POLOS.NET - THE VW Polo Forum

What 1.8t

What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t

Re: What 1.8t