Polo 9n 1.2 (BMD) compression problems

Discuss Engine, Gearbox and Exhaust
Post Reply
anstone
New
Posts: 1
Joined: Mon Feb 06, 2012 3:35 pm

Polo 9n 1.2 (BMD) compression problems

Post by anstone »

Hi all, I have a 2005 Polo 1.2 6v (BMD engine code) which is suffering from low compression on cylinder 2. I believe this is due to the well known problem with the exhaust valves, and being quite handy with spanners am looking to try and fix this myself. I am struggling to find a definitive list of what I should be replacing however!

Is there anyone that has already done this and can advise if there is a kit available from VW? Or if not, what should I be looking to purchase? I know I'll need a replacement head but would a low mileage second-hand one from a later model be OK? And does it matter if the engine code is slightly different as long as it's a 3 cyl 6v head?

Any information and advice gratefully received!
Post Reply