K&N cold air feed...

yosin · Post by **yosin** » Tue Jul 15, 2008 3:40 am

need some help to stick the cold air feed to the front top grill of the polo mk4 6n...

how did people cut the hole or what they use to cut through the plastic bit to get through to the grille?? or is there other ways.

thanks

Tim_GTi · Post by **Tim_GTi** » Tue Jul 15, 2008 10:27 pm

Cable ties? Have you also tried the passenger fog grill?

yosin · Post by **yosin** » Thu Jul 17, 2008 3:12 am

hey tim, im trying to get it through the plastic bit behind the grill..beacuse theres that plastic bit behind the grill that i need to cut through first in order to cable tie it onto the front grill...so im just wondering what did use to cut through the plastic as its quite solid and thick lol..

ass for passenger fog grill i might resort to that after if i cant cut through it lol..

right now its currently facing downwards at the bottom of the car

baileysufc · Post by **baileysufc** » Thu Jul 17, 2008 7:12 pm

best thign for cuttign plastcs liek taht is a die grinder or a electric version b&Q did tehm for 20 quid wilth loads of bits
at one point

or u cud drill a whole to start of and do it wiht a hacksaw blade
troy

yosin · Post by **yosin** » Thu Jul 17, 2008 10:08 pm

o i c...

i just did a little search...is like one of these?

http://www.diy.com/diy/jsp/bq/nav/nav.j ... d=products

thanks

baileysufc · Post by **baileysufc** » Fri Jul 18, 2008 6:27 pm

ye thats one btu u wud need a compressor for it if u do have one the air ones r betetr but

thsi is teh electric one

http://www.diy.com/diy/jsp/bq/nav/nav.j ... earch=true

they didi do a pro one of teh own brand but it not listed on teh sight

troy