Hi all,
I know this has been covered in a very good guide on these forums, However is there another entry point from the engine bay into the cabin of the car? Instead of grommet by the ECU.
The reason i ask this is that the length of vacuum hose i have isn't long enough for this route. So wondering if there is a path that goes straight into the drivers side of the car? Such as routing the line with the bonnet release cable
This would save me ordering for vacuum line.
Cheers
RamJam
Boost Gauge install
-
- New
- Posts: 5
- Joined: Sun Jun 07, 2015 2:15 pm
- Drives: Polo 9N3 GTI
-
- New
- Posts: 5
- Joined: Sun Jun 07, 2015 2:15 pm
- Drives: Polo 9N3 GTI
Re: Boost Gauge install
No worries guys, all sorted now
-
- New
- Posts: 15
- Joined: Thu Mar 24, 2016 4:36 pm
- Drives: 9N3 GTI Shadow Blue
- Location: South East
Re: Boost Gauge install
Going to be doing this myself soon.
Where about did you route the vacuum line in the end?
Where about did you route the vacuum line in the end?