Boost Gauge install

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
RamJam1993
New
Posts: 5
Joined: Sun Jun 07, 2015 2:15 pm
Drives: Polo 9N3 GTI

Boost Gauge install

Post by RamJam1993 »

Hi all,

I know this has been covered in a very good guide on these forums, However is there another entry point from the engine bay into the cabin of the car? Instead of grommet by the ECU.
The reason i ask this is that the length of vacuum hose i have isn't long enough for this route. So wondering if there is a path that goes straight into the drivers side of the car? Such as routing the line with the bonnet release cable

This would save me ordering for vacuum line.

Cheers
RamJam
RamJam1993
New
Posts: 5
Joined: Sun Jun 07, 2015 2:15 pm
Drives: Polo 9N3 GTI

Re: Boost Gauge install

Post by RamJam1993 »

No worries guys, all sorted now
Hennerzz
New
Posts: 15
Joined: Thu Mar 24, 2016 4:36 pm
Drives: 9N3 GTI Shadow Blue
Location: South East

Re: Boost Gauge install

Post by Hennerzz »

Going to be doing this myself soon.
Where about did you route the vacuum line in the end?
Post Reply