ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by **ciclo** » Wed Feb 25, 2015 7:06 pm

Ugabista, it is a totally different problem that you says.
Your problem is with the Chinese module, and his problem "was" the BCM.

Ugabista · Post by **Ugabista** » Wed Feb 25, 2015 7:14 pm

ciclo wrote:Ugabista, it is a totally different problem that you says.
Your problem is with the Chinese module, and his problem "was" the BCM.

Ahh ok, thanks

sambir · Post by **sambir** » Wed Feb 25, 2015 9:47 pm

Alright...next step is to buy a gtd emblem to fit on oem gti grill. I decided to just leave the led brightness as is...only a new bcm will fix this...

The chinese set makes the fogs start I guess it only starts the fog lights and this is just how the set works...would be nice to see the drls go on also. It does give the possibility to make the headlights start instead of fogs but this is not advised for xenon headlights...but only the drl leds and fogs would look neat.

Again thank you dude this small coding change made the ch and lh look like oem and I also got auto light now...what else could I ask for..

Sent from my iPhone using Tapatalk

Post by **ciclo** » Thu Feb 26, 2015 6:15 am

sambir · Post by **sambir** » Thu Feb 26, 2015 10:07 am

Aah would also be nice to fit the facelift taillights. Are you willing to build and sell me a pair of adapter cables?

Sent from my iPhone using Tapatalk

Post by **ciclo** » Thu Feb 26, 2015 12:17 pm

Thank you very much for your confidence.
Long ago I have no parts to make wirings taillights. I am sorry sincerely.

However, you can buy here: https://www.x2car.de/Adapter-fuer-VW-Po ... 1-Facelift

Post by **ciclo** » Mon Mar 02, 2015 9:08 am

Now 10% cheaper, last units.

http://www.uk-polos.net/view ... 09#p478298

Post by **ciclo** » Tue Mar 03, 2015 6:38 am

VCDS coding

DRL OFF with handbrake up.

Address 09: Cent. Elect. (J519)
Byte23 mark bit4

Remember, your binary or hexadecimal need not match those shown here.
I guess only be possible for xenon or BlueMotion.

A good friend told me (by reviewing his BCM), but still I have to check.

Post by **iichel** » Tue Mar 03, 2015 6:46 am

Works on BM

Post by **ciclo** » Tue Mar 03, 2015 6:51 am

Perfect.

jobbercete · Post by **jobbercete** » Tue Mar 03, 2015 1:23 pm

Need to check that las vcds trick on my car, why do you think it will only work on BM or Polo's with Xenon?

. There's another byte/bit with that option but it's not working for me...

Ah, still pending the mod you sent me the parts...I'm looking for a drill you know...

Post by **ciclo** » Tue Mar 03, 2015 2:08 pm

Because they are the only ones with DRLs controlled by the BCM.

Do not worry, I have another "new" encoding for BCM that might work for all POLO.
I will post soon... when I solve some small problems with VCDS.

Snap a photo when you install my gift ...

Post by **ciclo** » Tue Mar 03, 2015 8:03 pm

VCDS coding

The two static cornering lights turn on with reverse

Light switch must be low beam. (or AUTO

)

Address 09: Cent. Elect. (J519)
Byte21 mark bit3

Thanks to wamba.

Post by **iichel** » Tue Mar 03, 2015 10:19 pm

Also works om BM :p

Post by **ciclo** » Wed Mar 04, 2015 2:19 am

Thanks for sharing your experience with BlueMotion and the best xenon retrofit (with all functions working perfectly), not OEM.

The coding for static cornering lights should work on all VW POLO 6R with them.

UK-POLOS.NET - THE VW Polo Forum