ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Chat about your 6R/6C model Polos here!
peza2309
New
Posts: 2
Joined: Tue Feb 21, 2017 3:37 pm
Drives: 2015 1.2 TSI POLO 6C
Location: Northamptonshire

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by peza2309 »

ciclo wrote:
peza2309 wrote:Hi, I'm fairly new to all this but looking to start somewhere and this car looks gorgeous :D

Was wondering where you can find all these parts especially bits like the r line grille and bumpers?

Own a new 1.2 tsi 6c and parts are hard to come by I find

Cheers
Hello, welcome. :wink:

:arrow: If you learn to use these links will solve many of your questions.

In the first page of my topic there are many info but remember that you have a Polo 6C and, although it is similar to a 6R they are not the same car. Keep it in mind.
6R --- 2009-2014
6C --- 2015->
Thank you glad to be here :wink:

I thought that would be the case but just wanted it clarified by someone who knows what they're doing

As I said I'm struggling to find anything to fit the 6c and if you have he names of any dealers or websites that may have bits that would be greatly appreciated?

Thanks :P
wrecksigge
Getting There!
Posts: 67
Joined: Tue Dec 29, 2015 6:19 am
Drives: 2012 Polo GTI
Location: Sweden

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by wrecksigge »

Hey guys!

Sorry for hi-jacking this thread. I have a simple question. If i wanna disable the headlight washers, is it Fuse 46, 20A in the SB fuse box i should remove?

It says:
Headlight washer system relay
On-board supply control unit

It's the On-board supply Control unit that makes me a Little confused. Does that mean it's the powersupply to the relay on the controlunit for the wipers?

Or is it better to use VCDS to remove the function?

Cheers
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

peza2309 wrote:
Thank you glad to be here :wink:

I thought that would be the case but just wanted it clarified by someone who knows what they're doing

As I said I'm struggling to find anything to fit the 6c and if you have he names of any dealers or websites that may have bits that would be greatly appreciated?

Thanks :P
It's very difficult to answer your question. There are many places to shop and everyone deserves a chance.

I think it is best to search with google or your browser and ask in forums about the particular item you want to buy.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

wrecksigge wrote:Hey guys!

Sorry for hi-jacking this thread. I have a simple question. If i wanna disable the headlight washers, is it Fuse 46, 20A in the SB fuse box i should remove?

It says:
Headlight washer system relay
On-board supply control unit

It's the On-board supply Control unit that makes me a Little confused. Does that mean it's the powersupply to the relay on the controlunit for the wipers?

Or is it better to use VCDS to remove the function?

Cheers
VCDS only
Byte14 Bit0 disable

If you remove the 46 fuse the horn emits a deafening noise. :mrgreen: Test it.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

Today I discovered that the rain closing works on my 6R without locking the door with the remote.

Test conditions:
Wipers lever in the first position + light switch in AUTO position and without lock the car with the remote.

Once the water is sprayed on the windshield/RLS the windows are raised and the mirrors are folded automatically at the same time, but the central locking no works...

VCDS Autoscan = first page of this topic.

Edit:

:arrow: Video here
Last edited by ciclo on Thu Mar 02, 2017 7:43 pm, edited 1 time in total.
Adam87
Bronze Member
Posts: 207
Joined: Tue Apr 12, 2016 8:25 pm
Drives: T5.2
Location: England

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by Adam87 »

Part way there Fernando [emoji848], you must have some coding correct for it to function at all


Sent from my iPhone using Tapatalk
wrecksigge
Getting There!
Posts: 67
Joined: Tue Dec 29, 2015 6:19 am
Drives: 2012 Polo GTI
Location: Sweden

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by wrecksigge »

ciclo wrote:
VCDS only
Byte14 Bit0 disable

If you remove the 46 fuse the horn emits a deafening noise. :mrgreen: Test it.
Haha really :mrgreen: ? Guess ill stick to VCDS then, thanks Ciclo :D !
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

wrecksigge wrote:
ciclo wrote:
VCDS only
Byte14 Bit0 disable

If you remove the 46 fuse the horn emits a deafening noise. :mrgreen: Test it.
Haha really :mrgreen: ? Guess ill stick to VCDS then, thanks Ciclo :D !
:wink: :lol:
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

Adam87 wrote:Part way there Fernando [emoji848], you must have some coding correct for it to function at all


Sent from my iPhone using Tapatalk
Yes, ... I suppose something related to the WRMs coding (btw :wink: ), or to the RLS (tested Byte1 Bit6 & Bit7 without appreciable changes for rain closing)

RLS test:
From 0728DD
To 0768DD or 07A8DD or 07E8DD (accepted codings)
benzinkopf
Gold Member
Posts: 859
Joined: Wed Apr 02, 2014 4:01 pm
Drives: 1.2TSI 105HP DSG7
Location: Malaysia

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by benzinkopf »

ciclo wrote:Today I discovered that the rain closing works on my 6R without locking the door with the remote.

Test conditions:
Wipers lever in the first position + light switch in AUTO position and without lock the car with the remote.

Once the water is sprayed on the windshield/RLS the windows are raised and the mirrors are folded automatically at the same time, but the central locking no works...

VCDS Autoscan = first page of this topic.
Did you check whether it's working after a while, let say 10mins? I've tested mine, even without locking the doors, it seems to be working only within short time, and the BCM is going to sleep mode. Once u unlock remotely after a period of time(although the car is not lock), BCM will wake up, RLS detected the water I tested, it closed the windows again.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

benzinkopf: Good observation. I'll have to check.

-----






to olegre:


ImageOLEGRE!... :lol: viewtopic.php?f=62&p=518599#p518599
rdasadia
Getting There!
Posts: 68
Joined: Mon Mar 21, 2016 7:56 pm
Drives: Polo GT 1.2TSI DSG 6R 2016
Location: India

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by rdasadia »

ciclo wrote:First you must show us an autoscan with your original BCM. Your question requires it.

However, I think that the best option would be 7E0937090B, as you know, to install it on your GT imply some adjustments in the original wiring. Bear in mind that the Direct TPMS (High) has not yet been tested on the POLO 6R through CAN lines powertrain.

Your best bet or my recommendation is talk to firegrafik for the BCM purchase.
Hi Below is my scan log. After you go through my scan log I have following question.
1) Difference between 7E0937090B & 7E0937090D?
2) If I upgrade the BCM for only High TPMS do I need to change/modify the wire harness for this BCM to work
3) Please help me where to buy high BCM

Chassis Type: 60 (6RU)
Scan: 01 02 03 08 09 15 17 19 25 44 56

VIN: MEXA16604GT072590 Mileage: 20km-12miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000

-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZB) Labels: 03F-906-070-CBZ.clb
Part No SW: 03F 906 070 KC HW: 03F 907 309 AJ
Component: SIMOS10.22AH10 6270
Revision: --H10--- Serial number:
Coding: 00250056232400080000
Shop #: WSC 01234 785 00200
ASAM Dataset: EV_ECM12TFS02103F906070KC 004006
ROD: EV_ECM12TFS02103F906070FJ.rod
VCID: 6DDBDF03BC6C5056AA-8038

No fault code found.
Readiness: 0010 0101

-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 0AM-927-769.clb
Part No SW: 0AM 300 065 N HW: 0AM 927 769 D
Component: GSG DSG AG7 431 6501
Revision: 00043014 Serial number: CU501511017434
Coding: 0000020
Shop #: WSC 01324 785 00200
VCID: 3A71245F75A237EE7F-806E

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: None
Part No SW: 6R0 907 379 BN HW: 6R0 907 379 AS
Component: ESP9.0i front H03 0001
Serial number: --------------
Coding: 62DD2463422A03C2461924724251C0800908
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_Brake1ESP90iBOSCH 003031
ROD: EV_Brake1ESP90iBOSCH_AU21.rod
VCID: 0B1FB19BA2B8FE6614-805E

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 6R0-907-044.clb
Part No SW: 6R0 907 044 Q HW: 6R0 907 044 Q
Component: Climatronic H12 0615
Revision: V0000000
VCID: 418353B3D87464363E-8014

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 6R0-937-08x-09.clb
Part No SW: 6RU 937 087 M HW: 6RU 937 087
Component: BCM IM H+4 H40 0432
Revision: BZ040001 Serial number: 0300 015160323
Coding: 3AB02BFF08A10000013800006C2B069000C0414F608C0000200000000000
Shop #: WSC 124697 483 00190
VCID: 6CDDD2078F76595EBD-8038

Subsystem 1 - Part No: 5K7 955 559 B
Component: RLS 271115 03 37 0059
Coding: 0368DD

Subsystem 2 - Part No SW: 6R0 959 802 EF HW: 6R0 959 802 EF Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 020 2551
Coding: 000000

Subsystem 3 - Part No SW: 6R0 959 801 ED HW: 6R0 959 801 ED
Component: J387__TSG_BT 020 2551
Coding: 000000

Subsystem 4 - Part No SW: 6C0 959 442 HW: 6C0 959 442
Component: E221__MFL-TAT H04 0019
Coding: 240000

Subsystem 5 - Part No SW: 6R0 959 811 S HW: 6R0 959 811 S
Component: J388__TSG_HL 019 1552
Coding: 000000

Subsystem 6 - Part No SW: 6R0 959 812 S HW: 6R0 959 812 S
Component: J389__TSG_HR 019 1552
Coding: 000000

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 6R0 959 655 J HW: 6R0 959 655 J
Component: VW10AirbagU06 H10 0020
Revision: -------- Serial number: 003GW012EG31
Coding: 003036
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250_SE25.rod
VCID: 49934B93E844AC76E6-801C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 6RF 920 861 B HW: 6RF 920 861 B
Component: KOMBI H01 0215
Serial number: 00000000000000
Coding: 140800
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05729
ROD: EV_Kombi_UDS_VDD_RM09_SK35.rod
VCID: 4A91749FED42A76EEF-801E

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: None
Part No SW: 6RU 909 901 HW: 6RU 937 087
Component: GW-K-CAN TP20 H40 0432
Revision: BZ040001
Coding: 002300
Shop #: WSC 124697 483 00190
VCID: 1933DBD310641CF696-804C

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H01 0215
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_SE25.rod
VCID: 6AD1D41F8D82476ECF-803E

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels: 1Sx-909-144-44.clb
Part No SW: 1S2 909 144 P HW: 1S2 909 144 P
Component: EPS_ECU H61 1702
Coding: 0001000000000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisNSK 014008
ROD: EV_SteerAssisNSK_SE12.rod
VCID: 418353B3D07464363E-8014

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: None
Part No SW: 6RF 035 187 HW: 6RF 035 187
Component: Radio 013 0116
Revision: -------- Serial number: VWZGZ1R3521196
Coding: 0000040000000F
Shop #: WSC 00788 648 00255
VCID: 060980AFB1DA830E4B-8052

No fault code found.

End-------------------------(Elapsed Time: 02:08)-------------------------
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

rdasadia wrote:
ciclo wrote:First you must show us an autoscan with your original BCM. Your question requires it.

However, I think that the best option would be 7E0937090B, as you know, to install it on your GT imply some adjustments in the original wiring. Bear in mind that the Direct TPMS (High) has not yet been tested on the POLO 6R through CAN lines powertrain.

Your best bet or my recommendation is talk to firegrafik for the BCM purchase.
Hi Below is my scan log. After you go through my scan log I have following question.
1) Difference between 7E0937090B & 7E0937090D?
2) If I upgrade the BCM for only High TPMS do I need to change/modify the wire harness for this BCM to work
3) Please help me where to buy high BCM

VIN: MEXA16604GT072590 Mileage: 20km-12miles
Is it the first Autoscan you did? :)

1) The second is the one I would like to have just now, but I'm afraid it does not exist yet. :lol:
If you mean 7H0 937 090 D as the second, the difference with the first is that the first has the most updated software.
I do not know if this 7H0 BCM will manage High TPMS (probably not). Hmm... 7H0937090D = aliexpress?

2)Yes. It is possible to do some tricks, but it ends up being a nightmare, so it is necessary to adapt the wiring.

3) viewtopic.php?f=56&t=58703&start=3135#p518474 (again)
firegrafik
Bronze Member
Posts: 205
Joined: Thu Jan 28, 2016 10:23 am
Drives: 6R 1,6MPI(CFNA) sedan
Location: Buzuluk, Orenburg region, Russia
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by firegrafik »

rdasadia wrote:
....
3) Please help me where to buy high BCM
rdasadia, please check your private messages. Three days ago I had sent you the info concerning max BCM purchasing.
rdasadia
Getting There!
Posts: 68
Joined: Mon Mar 21, 2016 7:56 pm
Drives: Polo GT 1.2TSI DSG 6R 2016
Location: India

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by rdasadia »

firegrafik wrote:
rdasadia wrote:
....
3) Please help me where to buy high BCM
rdasadia, please check your private messages. Three days ago I had sent you the info concerning max BCM purchasing.
Yes I received it. Can you please help me purchase this BCM.
Locked