ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

[Adam87]

firegrafik, please, can you translate the 0 and 1 Bits?

No problem.
Bit 0 Alternator with LIN bus installed
Bit 1 Battery/sensor with LIN bus installed

Guessing that also has to be selected for battery regulator?


Sent from my iPhone using Tapatalk

[firegrafik]

Guessing that also has to be selected for battery regulator?

Yes, and not only in 0 Byte.
The coding in all bytes should filled.
On the picture above is coding for T6

[iichel]

Adress 61 coding for T6:

byte 0
bit 0 generator with LIN connection installed
bit 1 battery/current sensor with LIN installed (in the negative pole of the battery)

byte 1
bit 0 start/stop with voltage/current sensor installed
bit 1 recuperation installed
bit 2 history storage (MY 2012+)
bit 3 extended recuperation active
bit 5 FSI engine

byte 2
bit 0 battery in boot
bit 1 battery transverse (in combination with bit 3)
bit 3 battery in the front
bit 4 AGM battery OR enhanced flood battery
bit 5 enhanced flood battery
bit 6 enhanced flood battery

bit 3: generator ratio
HEX values:
58 generator ratio 2.38
5A generator ratio 2.4 (all other 4 cyl engines + CFWA)
64 generator ratio 2.50 (1.2l and 1.4 FSI)
73 generator ratio 2.65 (3.6 V6 and V6 FSI)
76 generator ratio 2.68 (110A)
FE generator ratio 4.04 (140A)

PS

[gti16]

Ciclo
As you can see, everything is correct but the light is always on.
In byte20 it does not have any bit3, how do I then ?.

Code: Select all

Sunday,08,January,2017,12:47:26:62939
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.0.0
Data version: 20130910


VIN: WVWZZZ6RZBY158866   License Plate: 
Mileage: 75049   Repair Order: 


Chassis Type: 6R (6N0)
Scan: 01 03 08 09 10 15 17 19 25 37 44 56 61

VIN: WVWZZZ6RZBY158866   

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CAYC)       Labels: 03L-906-023-CAY.clb
   Part No SW: 03L 906 023 G    HW: 03L 906 023 D
   Component: 1,6l R4 CR td H13 9970  
   Revision: --H13---    Serial number:               
   Coding: 00114016002400080000
   Shop #: WSC 00788 648 00255
   ASAM Dataset: EV_ECM16TDI02103L 003010
   ROD: N/A
   VCID: 2A5BE4234D0AF24EEA7-807F

No ASAM data for: "EV_ECM16TDI02103L" (VW36 *) 
No fault code found.
Readiness: 1110 1000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 6R0-907-37x-ESP82.clb
   Part No SW: 6R0 907 379 AJ    HW: 6R0 907 379 AF
   Component: ESP8.2i front H05 0001  
   Revision: --------    
   Coding: 210248E3417200BA842D12E882D700421300
   Shop #: WSC 00788 648 00255
   VCID: 8603F09335D2762E2EF-80D3

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels: 6R0-907-044.clb
   Part No SW: 6R0 907 044 H    HW: 6R0 907 044 H
   Component: Climatronic   H11 0711  
   Revision: V0000000    
   VCID: 387FCE6B8BA650DE6C3-806D

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: 7H0-937-08x-09.clb
   Part No SW: 7H0 937 090 B    HW: 7H0 937 090 
   Component: BCM PQ25 Max4 H74 0715  
   Revision: B9074001    Serial number: 0571 116130727
   Coding: 7DB02FB848610E0093380E307CAB8ED80F80610F60862001200000010000
   Shop #: WSC 36457 123 104857
   VCID: 2D51EF3F74E4E5760F5-8078

   Subsystem 1 - Part No: 1K0 955 559 AH  Labels: 1K0-955-559-AG.CLB
   Component: RLS 281010 05  54  0403 
   Coding: 0E302D

   Subsystem 2 - Part No SW: 6R0 959 801 R    HW: 6R0 959 801 R  Labels: 6R0-959-801.CLB
   Component: J386__TSG_FT  006 0903 
   Coding: 18BC30

   Subsystem 3 - Part No SW: 6R0 959 802 T    HW: 6R0 959 802 T
   Component: J387__TSG_BT  006 0902 
   Coding: 08BC30

   Subsystem 4 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 5 - Part No: 1K8 951 605 A
   Component: LIN BACKUP HO  H11 9004 
   Coding: 000000

   Subsystem 6 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 7 - Part No SW: 5K0 959 542 A    HW: 5K0 959 542 A
   Component: E221__MFL-TAS  H07 0013 
   Coding: 020000

   Subsystem 8 - Part No SW: 6R0 959 811 F    HW: 6R0 959 811 F
   Component: J388__TSG_HL  006 0902 
   Coding: 08BC32

   Subsystem 9 - Part No SW: 6R0 959 812 F    HW: 6R0 959 812 F
   Component: J389__TSG_HR  006 0902 
   Coding: 08BC32

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels: 7E0-919-475.clb
   Part No SW: 7E0 919 475 L    HW: 56D 919 475 
   Component: PARKHILFE 8K  H02 0106  
   Revision: --------    Serial number: 35811333101508
   Coding: 308002
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_VW75XParkAssis8K 001003
   ROD: EV_VW75XParkAssis8K.rod
   VCID: 3B75D167B2907BC6811-806E

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels: 5K0-959-655.clb
   Part No SW: 6R0 959 655 K    HW: 6R0 959 655 K
   Component: VW10Airbag01M H09 0020  
   Revision: --------    Serial number: 003GX00ANB5F
   Coding: 00314D
   Shop #: WSC 00788 648 00255
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250_VW24.rod
   VCID: 4A9B84A3ED4AD24E0A7-801F

   Crash sensor for side airbag; driver side: 
   Serial number: 3575HRB405B06JDC6PVZ

   Crash sensor for side airbag; passenger side: 
   Serial number: 3585HRB4053085G2CH2L

   Crash sensor for side airbag; rear driver side: 
   Serial number: 3515RRB405504QLU3P1V

   Crash sensor for side airbag; rear passenger side: 
   Serial number: 3525RRB405704QLU1PE2

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb
   Part No SW: 6R0 920 861 F    HW: 6R0 920 861 F
   Component: KOMBI         H04 0304  
   Serial number: 00000000000000
   Coding: 140E00
   Shop #: WSC 00788 648 00255
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
   ROD: EV_Kombi_UDS_VDD_RM09_SE35.rod
   VCID: 387FCE6B83A650DE6C3-806D

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 6N0-909-901-19.lbl
   Part No SW: 6N0 909 901     HW: 7H0 937 090 
   Component: GW-K-CAN TP20 H74 0715  
   Revision: B9074001    
   Coding: 002200
   Shop #: WSC 36457 123 104857
   VCID: F0EFB64B2356489EE43-80A5

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels: 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H04 0304  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
   ROD: EV_Immo_UDS_VDD_RM09_VN35.rod
   VCID: EADBA4230D8AB24EAA7-80BF

No fault code found.

-------------------------------------------------------------------------------
Address 37: Navigation (J0506)       Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 L    HW: 1T0 035 680 C
   Component: RNS-MID       H04 5238  
   Revision: AB001001    Serial number: VWZ6Z7K3029008
   Coding: 04000440010000A10001
   Shop #: WSC 72796 133 80617
   VCID: 377DCD5786B85FA6659-8062

   Subsystem 1 - Part No: 1T0 919 859 B
   Component: EU West V12  8195 

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 6Q0-423-156.clb
   Part No: 6R0 423 156 B
   Component: LenkhilfeTRW        V277  
   Coding: 11230
   Shop #: WSC 00788  
   VCID: 2F6DF537EAE897663D9-807A

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J0506)       Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 L    HW: 1T0 035 680 C
   Component: RNS-MID       H04 5238  
   Revision: AB001001    Serial number: VWZ6Z7K3029008
   Coding: 04000440010000A10001
   Shop #: WSC 72796 133 80617
   VCID: 377DCD5786B85FA6659-8062

   Subsystem 1 - Part No: 1T0 919 859 B
   Component: EU West V12  8195 

No fault code found.

-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840)       Labels: 1K0-907-534.clb
   Part No SW: 7H0 907 534     HW: 7H0 937 090 
   Component: Batt.regelung H74 0715  
   Serial number: 0571 116130727
   Coding: 16890A5A
   Shop #: WSC 36457 123 104857
   VCID: EBD5A1270A70AB46D11-80BE

   Subsystem 1 - Part No SW: 6R0 915 181 E    HW: 6R0 915 181 E
   Component: J367-BDM  H08 0181 

No fault code found.

End   ---------------------------------------------------------------------

[iichel]

maybe try this coding for the 61: 16800A5A
your current coding indicates that your car has the start/stop system, but i guess it doesn't.

your byte 20 bit 3 is set to 0 (off), that is ok.

[gti16]

maybe try this coding for the 61: 16800A5A
your current coding indicates that your car has the start/stop system, but i guess it doesn't.

your byte 20 bit 3 is set to 0 (off), that is ok.

I already tested all these options in module 61 and the light does not turn off.
Is BCM well configured?

[ciclo]

gti16,
...there are several ways to enable bits, via binary, via hexadecimal, via mark the box, or via copying and pasting the full coding.
I think that in the Ross tech page is somewhere explained.

Test this BCM coding:
7DB02FB848610E0093380E307CAB8ED80F80610F68862001200000010000
(Byte20 Bit3 enabled)

Please, in case of faults, copy and paste them here.

[Adam87]

Does LIN need connecting to the alternator if I don't have start/stop?

Guessing that also has to be selected for battery regulator?

Yes, and not only in 0 Byte.
The coding in all bytes should filled.
On the picture above is coding for T6

Thanks [emoji106]


Sent from my iPhone using Tapatalk

[iichel]

maybe to someones inspiration:

7L6907155A
+
7L6864298 9B9
+
1J0972753
+
Polo 6R

=



I think it's a bright idea

[ciclo]

Does LIN need connecting to the alternator if I don't have start/stop?

Apparently not. https://www.drive2.ru/l/457363852879727312/
BCM 7E0937090B

----------

gti16's BCM
Address 09: Cent. Elect. (J519) Labels: 7H0-937-08x-09.clb
Part No SW: 7H0 937 090 B HW: 7H0 937 090
Component: BCM PQ25 Max4 H74 0715

7L3? 7L6? ... unknown.
---------

I guess the parameters from both bcm and both batteries will be different. The question is how to easily fix the warning battery light in gti16's 6R (7L3) since it is only a parameter fault, it is not a real warning.


More info:

[Adam87]

maybe to someones inspiration:

7L6907155A
+
7L6864298 9B9
+
1J0972753
+
Polo 6R

=



I think it's a bright idea

Cool [emoji41] I think I may install it in my transporter, what amp is it rated to?


Sent from my iPhone using Tapatalk

[iichel]

maybe to someones inspiration:

7L6907155A
+
7L6864298 9B9
+
1J0972753
+
Polo 6R

=
<big ass picture>

I think it's a bright idea

Cool [emoji41] I think I may install it in my transporter, what amp is it rated to?


Sent from my iPhone using Tapatalk

it's rated at 150W at 230V, but in the fuse box I took 30A at 12V. The reason is that all the other models with factory fitted 230V sockets (i.e. Golf 7 estate, Touareg) have it on 30A.

The peak current is probably higher than (130W/12V = 11A), due to the transformer. For me, it feels ok to have it at 30A even though it feels a bit over-powered :p

[Adam87]

Where did you connect to convenience module pin to? BCM?


Sent from my iPhone using Tapatalk

[iichel]

No simply to a terminal 15.

[gti16]

I tested the new code on the BCM and the battery module and nothing happened.