ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
I think he told me that you were helping him in that matter.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Do you think wait for a used one?ciclo wrote:
Hi Adam87, do not buy yet ... wait.
Sent from my iPhone using Tapatalk
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
No, everything you need to know is here, thanks to rdasadia.Adam87 wrote:Do you think wait for a used one?ciclo wrote:
Hi Adam87, do not buy yet ... wait.
Sent from my iPhone using Tapatalk
Two links for fast people:
http://www.ebay.de/itm/391739327940?ul_noapp=true
http://www.ebay.de/itm/Neu-Original-VW- ... Swr7ZW5HUe
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
iichel wrote:Maybe it also needs some wiring to pass by the external can gateway in Bluemotion 6R
iichel, what do you think?ciclo wrote:I think he told me that you were helping him in that matter.
https://drive.google.com/file/d/0B2nv91 ... sp=sharing
I apologize for the images and some comment on them ... (always with the best of my intentions)
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
So comfort can is there already....
You need dash can wires for the cluster, tpms and hba with 7E0
You need new diagnostics can wires to obd2
New powertrain can wires, splice i.e. with G85
New lin to old can wires for lin generator and battery monitoring sensor.
Forever remove the old can gateway and isolate the old wires
You need dash can wires for the cluster, tpms and hba with 7E0
You need new diagnostics can wires to obd2
New powertrain can wires, splice i.e. with G85
New lin to old can wires for lin generator and battery monitoring sensor.
Forever remove the old can gateway and isolate the old wires
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
In short, everything it has already been said in my topic (a long time ago) and the recent links.iichel wrote:So comfort can is there already....
You need dash can wires for the cluster, tpms and hba with 7E0
You need new diagnostics can wires to obd2
New powertrain can wires, splice i.e. with G85
New lin to old can wires for lin generator and battery monitoring sensor.
Forever remove the old can gateway and isolate the old wires
Or maybe you have not read it?
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
How to install 7E0937090B BCM Max for 2011 Polo 6R Bluemotion H4 halogen headlights LHD
To my friend Cihan.
Preview (10 pages)
View or download here
To my friend Cihan.
Preview (10 pages)
View or download here
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Haha havent read all of it... Only most of itciclo wrote:In short, everything it has already been said in my topic (a long time ago) and the recent links.iichel wrote:So comfort can is there already....
You need dash can wires for the cluster, tpms and hba with 7E0
You need new diagnostics can wires to obd2
New powertrain can wires, splice i.e. with G85
New lin to old can wires for lin generator and battery monitoring sensor.
Forever remove the old can gateway and isolate the old wires
Or maybe you have not read it?
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hmm... since you are moderator in the Dutch forum (long time ago) you do not pay attention to what really matters ...iichel wrote:Haha havent read all of it... Only most of itciclo wrote:In short, everything it has already been said in my topic (a long time ago) and the recent links.iichel wrote:So comfort can is there already....
You need dash can wires for the cluster, tpms and hba with 7E0
You need new diagnostics can wires to obd2
New powertrain can wires, splice i.e. with G85
New lin to old can wires for lin generator and battery monitoring sensor.
Forever remove the old can gateway and isolate the old wires
Or maybe you have not read it?
I deduce from your previous reply about the CAN for TPMS that you pay no attention to what really matters... in this same page.
By the way, how about your keyless mod? Have you solved the riddle?
I'll explain the question in case you do not pay enough attention:
I do not ask you if others have solved the riddle, I ask you if the riddle has been solved by you.
Between your lack of attention and my bad english we can become the most comical couple in the whole network ...
-
- New
- Posts: 1
- Joined: Mon Apr 17, 2017 6:59 pm
- Drives: 6R GTI
- Location: England
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Hi, are you able to provide me with some help about some headlights please? Having problems with my DTRL. Would message you but i am unsure how as i only joined today. Thanks!
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Welcome giorgiofrattolillo.
In order to send private messages it is necessary to have at least 10 messages in the forum.
Tell me here what the problem is with your DTRL (DRL ), please specify what type of headlights are. H4 single, H7 twin, Bixenon.
Hmm... GTI with front WRC bumper?
In order to send private messages it is necessary to have at least 10 messages in the forum.
Tell me here what the problem is with your DTRL (DRL ), please specify what type of headlights are. H4 single, H7 twin, Bixenon.
Hmm... GTI with front WRC bumper?
-
- Silver Member
- Posts: 493
- Joined: Wed Dec 07, 2016 8:34 pm
- Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
- Location: Foothills of Nilgiris, India
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Master I have ordered the 4 parts you mentioned for passenger side door lock switch mod for my 6R RHD.
I want to know, what size terminals and wires are required for wiring so that I can order. Thanks
I want to know, what size terminals and wires are required for wiring so that I can order. Thanks
- iichel
- Bling Bling Diamond Member
- Posts: 6361
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
door lock switch = micro quadlock system, wire diameter 0.35mm2 or larger
0.5mm2 = 000 979 009 E 2x
1 wire holds two crimp connectors
Door connector T28:
Female MCP 1.5 and male MCP 1.5
000 979 025 E and 000 979 020 E, both 1x
Remember, you only lead one wire to the T28, the other two (58d and GND) are in the door wiring harness
0.5mm2 = 000 979 009 E 2x
1 wire holds two crimp connectors
Door connector T28:
Female MCP 1.5 and male MCP 1.5
000 979 025 E and 000 979 020 E, both 1x
Remember, you only lead one wire to the T28, the other two (58d and GND) are in the door wiring harness
-
- Silver Member
- Posts: 493
- Joined: Wed Dec 07, 2016 8:34 pm
- Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
- Location: Foothills of Nilgiris, India
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Thanks a lot iicheliichel wrote:door lock switch = micro quadlock system, wire diameter 0.35mm2 or larger
0.5mm2 = 000 979 009 E 2x
1 wire holds two crimp connectors
Door connector T28:
Female MCP 1.5 and male MCP 1.5
000 979 025 E and 000 979 020 E, both 1x
Remember, you only lead one wire to the T28, the other two (58d and GND) are in the door wiring harness
But according to Master Ciclo's wiring diagram, 2 wires(T28a/11 to T28/14 and T28a/14 to T28/15) lead to door lock switch,
plus other two 58d and GND from door wiring harness as you said.
Am I missing something??
Here viewtopic.php?f=56&t=58703&start=75#p473025
- ciclo
- Bling Bling Diamond Member
- Posts: 7787
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
https://scontent.cdninstagram.com/t50.2 ... 7696_n.mp4ciclo wrote:Welcome giorgiofrattolillo.
In order to send private messages it is necessary to have at least 10 messages in the forum.
Tell me here what the problem is with your DTRL (DRL ), please specify what type of headlights are. H4 single, H7 twin, Bixenon.
Hmm... GTI with front WRC bumper?
wow!
patil wrote: ciclo I have ordered the 4 parts you mentioned for passenger side door lock switch mod for my 6R RHD.
I want to know, what size terminals and wires are required for wiring so that I can order. Thanks
How many times will I have to post the following link?
viewtopic.php?f=10&t=42713#p466570
I can assure you that all the information you need is contained in those links with absolute precision.
First look at the etka the connectors reference of your car. (At the end of the electrical part)
Then look at the Russian link to know which terminals are needed for each type of connector depending on numbers of pins.
It's really simple.
Please understand that it takes me the same time as anyone to do the necessary searches ...