ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2B-Steer. Col. Lock -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
47-Sound System -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
77-Telephone -- Status: OK 0000
....
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2B-Steer. Col. Lock -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
47-Sound System -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
77-Telephone -- Status: OK 0000
....
-
- Getting There!
- Posts: 68
- Joined: Mon Mar 21, 2016 7:56 pm
- Drives: Polo GT 1.2TSI DSG 6R 2016
- Location: India
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
@ firegrafik. Got your message. How do I communicate with you directly as I am unable to reply your private messages.rdasadia wrote:Yes I received it. Can you please help me purchase this BCM.firegrafik wrote:rdasadia, please check your private messages. Three days ago I had sent you the info concerning max BCM purchasing.rdasadia wrote:
....
3) Please help me where to buy high BCM
@ ciclo how do I get the wiring Harness to upgrade my BCM to 7E0
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
So your KESSY already works?iichel wrote:01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2B-Steer. Col. Lock -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
47-Sound System -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
77-Telephone -- Status: OK 0000
....
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
ciclo, do you fancy a challenge?
i'm in the process of the kessy retrofit. so far the modules communicate with the rest of the car but keyless entry and start don't work.
i've had the modules adapted by an expert, but i'm also not sure about the VCDS coding and keyless entry.
the immobiliser part, that cannot be done with VCDS, but the coding of the BCM... could you help to check if it's ok?
i've based it on the wiring diagrams on the VW Jetta AW0 and VW Beetle. that all seems to be ok.
05 module coding 000F0F = kessy
05 module coding 010E0E = keyless entry only
25 module coding 000000 = start via ignition lock
25 module coding 000007 = start via kessy
2B module coding 4900000000000000 = DSG
2B module coding 4100000000000000 = manual trans
I have three new kessy keys that should be adapted to the immo and the 2B module and 25 immobiliser
What does work:
the two old keys for opening the door
What doesn't work:
1) the three new keys for opening the door via touch button
2) the three new keys for opening the door via keyless entry
3) switching on ignition via start button, without pressing clutch
4) switching on the engine via start button, while pressing clutch
For 1), the channel 01 of the BCM for remote adaptation should not be available, but it is available.
See: http://wiki.ross-tech.com/wiki/index.ph ... rol_Module
So here, I guess there needs be be some coding to the BCM.
Byte 25 bit 7 is 'kessy installed'. I checked this in my BCM coding, but so far no luck.
For 2), I have ordered a VAS 5054A with VAS PC V19
For 3) and 4), I will re-check wiring...
I would like your advise here, on what to code. I have some Jetta autoscans here:
https://drive.google.com/drive/folders/ ... sp=sharing
my autoscan:
(no convenience menu)
Keyless entry, no:
https://www.youtube.com/watch?v=yI6XTAUz-2Q
Keyless start, no. Emergency start no.
https://www.youtube.com/watch?v=16dQrmmWQko
I'm still in very good contact with the kessy expert, but I'm afraid the PQ25 BCM is not his expertise
i'm in the process of the kessy retrofit. so far the modules communicate with the rest of the car but keyless entry and start don't work.
i've had the modules adapted by an expert, but i'm also not sure about the VCDS coding and keyless entry.
the immobiliser part, that cannot be done with VCDS, but the coding of the BCM... could you help to check if it's ok?
i've based it on the wiring diagrams on the VW Jetta AW0 and VW Beetle. that all seems to be ok.
05 module coding 000F0F = kessy
05 module coding 010E0E = keyless entry only
25 module coding 000000 = start via ignition lock
25 module coding 000007 = start via kessy
2B module coding 4900000000000000 = DSG
2B module coding 4100000000000000 = manual trans
I have three new kessy keys that should be adapted to the immo and the 2B module and 25 immobiliser
What does work:
the two old keys for opening the door
What doesn't work:
1) the three new keys for opening the door via touch button
2) the three new keys for opening the door via keyless entry
3) switching on ignition via start button, without pressing clutch
4) switching on the engine via start button, while pressing clutch
For 1), the channel 01 of the BCM for remote adaptation should not be available, but it is available.
See: http://wiki.ross-tech.com/wiki/index.ph ... rol_Module
So here, I guess there needs be be some coding to the BCM.
Byte 25 bit 7 is 'kessy installed'. I checked this in my BCM coding, but so far no luck.
For 2), I have ordered a VAS 5054A with VAS PC V19
For 3) and 4), I will re-check wiring...
I would like your advise here, on what to code. I have some Jetta autoscans here:
https://drive.google.com/drive/folders/ ... sp=sharing
my autoscan:
Code: Select all
Sunday,26,February,2017,11:41:56:62066
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 17.1.0.0 (x64)
Data version: 20170106 DS267.0
www.Ross-Tech.com
VIN: License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 6R (7E0)
Scan: 01 03 04 05 08 09 10 15 17 19 20 25 2B 2E 37 3C 44 47 55 56
61 69 6C 77 0B
VIN: Mileage: 0km-0miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: Malfunction 0010
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: Malfunction 0010
2B-Steer. Col. Lock -- Status: Sporadic communication error 1000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
47-Sound System -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: Malfunction 0010
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: Malfunction 0010
77-Telephone -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J000-CFWA) Labels: 03P-906-021-CFW.clb
Part No SW: 03P 906 021 B HW: 03P 907 425
Component: R3 1.2l TDI H06 9978
Revision: 12005001 Serial number:
Coding: 00114036033401080000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_ECM12TDI03103P906021B 001041
ROD: EV_ECM12TDI03103P906021AA.rod
VCID: 2757FDE35E1F6679AE-8072
No fault code found.
Readiness: 0 0 0 0 1
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 6R0-907-37x-ESP82.clb
Part No SW: 6R0 907 379 AK HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
Revision: --------
Coding: 000000000000000000000000000000000000
Shop #: WSC 00788 648 00255
VCID: 07179D63B2DF46798E-8052
No fault code found.
-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518) Labels: 5K0-959-434.clb
Part No SW: 5K0 959 434 E HW: 5K0 959 434
Component: VWKESSYPQ35GP 092 1202
Revision: 00092000 Serial number: 0346244897
Coding: 000F0F
Shop #: WSC 01342 020 12345
ASAM Dataset: EV_KESSYPQ35G A02717
ROD: EV_KESSYPQ35G_VW01.rod
VCID: 37772DA38EBFF6F93E-8062
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 6R0-907-044.clb
Part No SW: 6R0 907 044 H HW: 6R0 907 044 H
Component: Climatronic H12 0812
Revision: V0000000
VCID: 38752E9F8BA1F98137-806C
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 HW: 7E0 937 090
Component: BCM PQ25 Max4 H80 0733
Revision: B9080001 Serial number: 0771 092150183
Coding: 3CB02FF828CB2400933806E2FFEB9FD080A073EFE08D78D0228400030800
Shop #: WSC 12345 123 12345
VCID: 68D5BEDF9B81A90167-803C
Subsystem 1 - Part No: 5K7 955 559 B
Component: RLS 140415 03 37 0059
Coding: 0714DD
Subsystem 2 - Part No SW: 6R0 959 801 BD HW: 6R0 959 801 BD Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 003 8611
Serial number: KU0KU011111300010103
Coding: 0200A3
Subsystem 3 - Part No SW: 6R0 959 802 BF HW: 6R0 959 802 BF Labels: 6R0-959-802.CLB
Component: J387__TSG_BT 003 8611
Serial number: KU0KU007111300016463
Coding: 1000AB
Subsystem 4 - Part No: 1K8 951 171 A
Component: DWA-Sensor 00 001 0103
Coding: 000000
Subsystem 5 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000
Subsystem 6 - Part No: 1K8 951 171 A
Component: DWA-Sensor 00 001 0103
Coding: 000000
Subsystem 7 - Part No SW: 6R0 959 811 B HW: 6R0 959 811 B
Component: J388__TSG_HL 002 0803
Serial number: KU0-KU008.06.0910897
Coding: 08BC32
Subsystem 8 - Part No SW: 6R0 959 812 B HW: 6R0 959 812 B
Component: J389__TSG_HR 002 0803
Serial number: KU0-KU004.06.0913330
Coding: 08BC32
1 Fault Found:
03444 - Ignition Starter Switch
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 110
Mileage: 0 km
Time Indication: 0
Date: 2017.02.26
Time: 21:34:37
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels: 7E0-919-475.clb
Part No SW: 7E0 919 475 L HW: 7N0 919 475
Component: PARKHILFE 8K H06 0106
Revision: -------- Serial number: 28231422402620
Coding: 318001
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_VW75XParkAssis8K 001003
ROD: EV_EPHVA18VW250GPCS.rod
VCID: 3B7F3193B297D299DA-806E
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10Airbag01M H10 0020
Revision: -------- Serial number: 003GX0142TCE
Coding: 00314D
Shop #: WSC 01383 785 00200
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250_VW25.rod
VCID: 4A916457ED4D7B1151-801E
Crash sensor for side airbag: driver side:
Serial number: 3575HRB40650BI7U48C8
Crash sensor for side airbag: front passenger side:
Serial number: 3585HRB405J09RECEOUJ
Crash sensor for side airbag: rear: driver side:
Serial number: 3515RRB405T0BTBEF9G7
Crash sensor for side airbag: rear: passenger side:
Serial number: 3525RRB405R0BTBEKPFQ
1 Fault Found:
9437211 - Igniter for Driver's Airbag
B1000 1B [137] - Resistance Too High
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 2
Mileage: 0 km
Date: 2017.02.26
Time: 00:00:05
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 6R0 920 870 A HW: 6R0 920 870 A
Component: KOMBI H04 0709
Serial number: 00000000000000
Coding: 140E01
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
ROD: EV_Kombi_UDS_VDD_RM09_A04_VW25.rod
VCID: 336F19B39AC71AD902-8066
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: None
Part No SW: 7E0 909 901 HW: 7E0 937 090
Component: GW-K-CAN TP20 H80 0733
Revision: B9080001
Coding: 042201
Shop #: WSC 12345 123 12345
VCID: 68D5BEDF9B81A90167-803C
1 Fault Found:
02811 - Control Module for Electronic Steering Column Lock (J764)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 3
Reset counter: 150
Mileage: 0 km
Time Indication: 0
Date: 2017.02.26
Time: 21:27:59
-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844) Labels: 8S0-857-511.clb
Part No SW: 7E0 857 511 G HW: 7E0 857 511 E
Component: FLA H10 0003
Revision: AA001001
Coding: 040C00E200000000000000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_HighBeamAssisAU316 001004
ROD: EV_HighBeamAssisAU316.rod
VCID: 2E5908C771E537316D-807A
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H04 0709
Serial number: 00000000000000
Coding: 000007
Shop #: WSC 09402 015 1048576
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
VCID: 6AD1C4D78D8D9B1171-803E
1 Fault Found:
10493440 - Function Limitation due to Missing Enable from OCU/VTS
B201E 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Mileage: 0 km
Date: 2017.02.26
Time: 01:54:24
-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764) Labels: 5K0-905-861.clb
Part No SW: 5K0 905 861 B HW: 5K0 905 861 B
Component: ELV-PQ35 H20 0240
Revision: 00000000 Serial number: 11000256123005
Coding: 4100000000000000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_ELVMarquMPVW36X A01001
ROD: EV_ELVMarquMPVW36X.rod
VCID: 2F6715C376EF3E3966-807A
No fault code found.
-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650) Labels: 5N0-035-342.lbl
Part No SW: 5N0 035 342 G HW: 5N0 035 342 G
Component: SG EXT.PLAYER H19 0770
Revision: A1001003 Serial number: 7666620365
Coding: 010100
Shop #: WSC 12345 123 12345
VCID: 2B5F01D34AF742194A-807E
No fault code found.
-------------------------------------------------------------------------------
Address 37: Navigation (J0506) Labels: 1T0-035-680.clb
Part No SW: 1T0 035 686 E HW: 1T0 035 686 H
Component: RNS-MID H26 6276
Revision: AB001001 Serial number: VWZ6Z7P1950254
Coding: 00070002010000A10001
Shop #: WSC 12345 123 12345
VCID: 366920A781B50FF125-8062
Subsystem 1 - Part No: 1T0 919 859 B
Component: EU West V14 8477
No fault code found.
-------------------------------------------------------------------------------
Address 3C: Lane Change Labels: Redir Fail!
Part No SW: 7E0 907 566 B HW: 4L0 907 566 A
Component: J0769 SWA MasterH14 0120
Revision: 00H14000 Serial number: 6PZ 009 014-07
Coding: 0010161
Shop #: WSC 02757 790 00000
VCID: 2F6715C3BEEF3E3966-807A
Subsystem 1 - Part No: 7E0 907 568 B
Component: J0770 SWA Slave H09 0110
Subsystem 2 - Serial number: 6PZ 009 014-27
Subsystem 3 - Serial number: 5F31.03.1100H090003CH21982ˇ
Subsystem 4 - Serial number: H21982ˇ
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 6Q0-423-156.clb
Part No: 6R0 423 156 B
Component: LenkhilfeTRW V277
Coding: 11220
Shop #: WSC 00788
VCID: 2F6715C3EAEF3E3966-807A
No fault code found.
-------------------------------------------------------------------------------
Address 47: Sound System (R12) Labels: 5K0-035-456.clb
Part No SW: 5C6 035 456 C HW: 5C6 035 456 C
Component: KonzernAmp10K H08 6831
Revision: -------- Serial number: EAA098C0000052
ASAM Dataset: EV_AudioVerst10KanalSTT4 001001
ROD: EV_AudioVerst10KanalSTT4.rod
VCID: 2855FEDF53016901A7-807C
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J431) Labels: 6R0-907-357.clb
Part No SW: 6R0 907 357 HW: 6R0 907 357
Component: LWR-ECU H02 0070
Revision: -------- Serial number: --------------
Coding: 0192000001000000
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_HeadlRegulVWLWRPt 001004
ROD: EV_HeadlRegulVWLWRPt_VW25.rod
VCID: 77F7EDA3CE3F36F9FE-8022
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J0506) Labels: 1T0-035-680.clb
Part No SW: 1T0 035 686 E HW: 1T0 035 686 H
Component: RNS-MID H26 6276
Revision: AB001001 Serial number: VWZ6Z7P1950254
Coding: 00070002010000A10001
Shop #: WSC 12345 123 12345
VCID: 366920A781B50FF125-8062
Subsystem 1 - Part No: 1T0 919 859 B
Component: EU West V14 8477
No fault code found.
-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840) Labels: 1K0-907-534.clb
Part No SW: 7E0 907 534 HW: 7E0 937 090
Component: Batt.regelung H80 0733
Serial number: 0771 092150183
Coding: 03071A5A
Shop #: WSC 12345 123 12345
VCID: 68D5BEDF9B81A90167-803C
Subsystem 1 - Part No SW: 6C0 915 181 HW: 6C0 915 181
Component: J367-BDM H08 0223
Serial number: 61083A44504351928092
1 Fault Found:
02256 - Quiescent Current
001 - Upper Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 7
Fault Frequency: 1
Reset counter: 150
Mileage: 0 km
Time Indication: 0
Date: 2017.02.26
Time: 19:09:24
-------------------------------------------------------------------------------
Address 69: Trailer (J345) Labels: 1K0-907-383-V2.clb
Part No SW: 1K0 907 383 E HW: 1K0 907 383 E
Component: Anhaenger H07 0080
Revision: 3A002002 Serial number: 00000116932377
Coding: 0100000100000000
Shop #: WSC 12345 123 12345
VCID: 2F6715C37EEF3E3966-807A
No fault code found.
-------------------------------------------------------------------------------
Address 6C: Back-up Cam. Labels: 5N0-907-441.clb
Part No SW: 7E0 907 441 HW: 7E0 907 441
Component: J772__Rearview 0040
Revision: 00H08000 Serial number: 525PA8-J060533
Coding: 0030115
Shop #: WSC 12345 123 12345
VCID: 65CBB7EBAC93B4695C-8030
1 Fault Found:
03006 - Back-up Camera System not calibrated
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 110
Time Indication: 0
-------------------------------------------------------------------------------
Address 77: Telephone (J412) Labels: 3C8-035-730-A.clb
Part No SW: 3C8 035 730 E HW: 3C8 035 730 E
Component: Telefon 025 0983
Revision: -------- Serial number: 35502105254406
Coding: 020100000100010000000101
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_UHVPremi 002709
ROD: EV_UHVPremi_002.rod
VCID: 254BF7EB241374699C-8070
No fault code found.
End-------------------------(Elapsed Time: 04:32)--------------------------
Autoscan suggests yes, practice is no.CNK wrote:So your KESSY already works?iichel wrote:
Keyless entry, no:
https://www.youtube.com/watch?v=yI6XTAUz-2Q
Keyless start, no. Emergency start no.
https://www.youtube.com/watch?v=16dQrmmWQko
I'm still in very good contact with the kessy expert, but I'm afraid the PQ25 BCM is not his expertise
-
- Gold Member
- Posts: 859
- Joined: Wed Apr 02, 2014 4:01 pm
- Drives: 1.2TSI 105HP DSG7
- Location: Malaysia
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
[emoji33]im totally amazed with what you re capable of! Kessy in 6R!!! nice.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
@iichel was it marcin (spacewalker) you have spoken to? I know he retrofitted it into his 2005 touran, he's very knowledgable on IMMO / clusters etc,
What handles did you use for door unlocking?
Sent from my iPhone using Tapatalk
What handles did you use for door unlocking?
Sent from my iPhone using Tapatalk
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Yes, spacewalker has been a great expert so far. He is very knowledgeable about immo, kessy and keys. He coded my cluster, kessy module and ELV.
I used the 5N0837205L door handle 4x with the 5N0839167D cover 3x and 1x 5N1837879D cover for lock
I used the 5N0837205L door handle 4x with the 5N0839167D cover 3x and 1x 5N1837879D cover for lock
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
I think your in the right hands, between spacewalker and ciclo I'm sure you'll get sorted [emoji6] I wonder if them handles will fit a T5 [emoji23] did you have to drill your dashboard to fit start/stop button?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
No I went for the botton on the steering column as on to Tiguan and Scirocco. It's on the place where normally the ignition key goes.
- ciclo
- Bling Bling Diamond Member
- Posts: 7806
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Test with Byte25 Bit5 enabled (also) -------- LC,25,5,Komfortschließen über Kessyiichel wrote:ciclo, do you fancy a challenge?
i'm in the process of the kessy retrofit. so far the modules communicate with the rest of the car but keyless entry and start don't work.
i've had the modules adapted by an expert, but i'm also not sure about the VCDS coding and keyless entry.
the immobiliser part, that cannot be done with VCDS, but the coding of the BCM... could you help to check if it's ok?
What is the reason you have Byte25 Bit2 enabled?
Also:
Byte24 Bit1
Byte20 Bit7
Byte17 Bit5
Byte3 Bit6
Last edited by ciclo on Sun Feb 26, 2017 9:17 pm, edited 1 time in total.
- ciclo
- Bling Bling Diamond Member
- Posts: 7806
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
The first thing you have to do is read in full this forum topic viewtopic.php?f=56&t=69121#p515534rdasadia wrote:
@ ciclo how do I get the wiring Harness to upgrade my BCM to 7E0
You also can speak with graaja .
He right now is in this process of wiring adaptation (in addition to the installation of many new parts ).
The process would look like this (similar): viewtopic.php?f=56&t=69121&start=60#p517201
Please, take your time to think about this installation process and tell me if you would be able to install my wiring. Thanks.
(must locate the parts in your Polo GT physically and think about the installation at the same time)
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Adam87 you can have a look at the jetta (low equipment) or beetle they too have kessy on pq25
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Ah I see [emoji6] just looking through wiring and anything that may help youiichel wrote:Adam87 you can have a look at the jetta (low equipment) or beetle they too have kessy on pq25
Sent from my iPhone using Tapatalk
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
I'll triple check the wiring tomorrow
If you want a look at the wiring, I'll send you a link to my Google drive
If you want a look at the wiring, I'll send you a link to my Google drive