6n 20v turbo help
-
- New
- Posts: 2
- Joined: Mon Jul 11, 2016 10:03 pm
- Drives: White 6n 1.4 iv gl
- Location: Sunderland
6n 20v turbo help
I'm looking for some help with a20v turbo swap I'm about to start in my 6n it's a r reg 1.4 8v gl and the doner is a agu mk4 golf on a v get with cable throttle which of been informed is better , need to know what parts of the golf I can use and what bits I need to get , hoping someone on here has done one all info would be appreciated , thanks in advance
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 6n 20v turbo help
Its a big undertaking. Amongst other things, youll need a stubby seat ibiza master cylinder, shortened driveshafts, custom engine mounts and a whole host of other bits
-
- New
- Posts: 2
- Joined: Mon Jul 11, 2016 10:03 pm
- Drives: White 6n 1.4 iv gl
- Location: Sunderland
Re: 6n 20v turbo help
I'm not worried about loom or shafts , they are on route was looking for someone that's built one about mounts and gearcables and clutch ect and anything else I may have missed
Thanks for the reply
Thanks for the reply
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 6n 20v turbo help
Clutch from what I recall is a g60 with a vr6 flywheel
There's a couple of guys who have done 6n2 1.8T conversions. I would try and dig the topics out via the search
There's a couple of guys who have done 6n2 1.8T conversions. I would try and dig the topics out via the search