6N - Fitting a post 1998 Engine Cover

Speedlaw · Post by **Speedlaw** » Sat Sep 20, 2003 10:58 am

Polo 6N: Fitting a post - 1998 Engine Cover

Works on 6N cars with MPI - those with SPI can use this too, but they'll need additional customizing of the cover to allow for the accelerator cable.

Most Pre-1997 cars came without an engine cover, leaving all wiring and metal exposed. To clean this up a bit, I fitted the 1998 and onwards engine cover.

Read how here:

Printer Friendly PDF file

Get the reader if you don't have it already:

KarlM · Post by **KarlM** » Sat Sep 20, 2003 12:29 pm

v good write up there Alex. always wondered how easy that was to do....

Roll on payday!

Speedlaw · Post by **Speedlaw** » Sat Sep 20, 2003 1:35 pm

Yeah it's not that hard, I'd say it rates as 'low' on the Guru Level Scale. Quite fulfilling mod though!

benny_polo · Post by **benny_polo** » Sat Dec 11, 2004 7:36 pm

i've got a few pics of the modifications needed for the cover to fit spi cars

pm your email address and i'll send them to you..

metz · Post by **metz** » Sat Dec 11, 2004 7:46 pm

Would i be able to fit an engine cover to a gt? (mk3)

GroovyCarrot · Post by **GroovyCarrot** » Sat Dec 11, 2004 9:37 pm

I'd imagine you could fit a mk4 cover, as they're pretty much the same engine (the smaller engines, that is..). Probably need some modification though..

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Fri Dec 16, 2005 11:33 am

where can i get all these parts? can i get em from VAG com?

P20 DUB · Post by **P20 DUB** » Fri Dec 16, 2005 2:56 pm

are all these part numbers the same for UK?