Hi! Is there a simple way to add another beam to pin T5h/1?
I would like to do additional lighting as in this guide: https://drive.google.com/file/d/0B2nv91 ... FTMFk/view
How can I add there a new wire beam? Without soldering?
http://i60.tinypic.com/1zqdbpe.jpg
Any suggestions?
T5h/1 - additional wire beam?
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: T5h/1 - additional wire beam?
i would strongly recommend to solder new wires
- ciclo
- Bling Bling Diamond Member
- Posts: 7809
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: T5h/1 - additional wire beam?
For me (IMHO) the best way is crimping the two wires in the same terminal.
Examples:
----- click on pics
-----
In the following links you have additional information:
http://www.a4-freunde.com/showwiki.php? ... zu+gehoert (3)
http://www.uk-polos.net/view ... 90#p482495
Search with your browser: SN-48B (aliexpress.com)
Examples:
----- click on pics
-----
In the following links you have additional information:
http://www.a4-freunde.com/showwiki.php? ... zu+gehoert (3)
http://www.uk-polos.net/view ... 90#p482495
Search with your browser: SN-48B (aliexpress.com)
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: T5h/1 - additional wire beam?
I agree with ciclo that a double crimp is always the nicest solution. But fot the T5h/1, the wire is fairly tight in the bend there.
Cutting of the original terminal off shortens it by about 1 cm and then it becomes even tighter there. I'm not sure that is good on that spot, but it is good to consider a double crimp yes.
Cutting of the original terminal off shortens it by about 1 cm and then it becomes even tighter there. I'm not sure that is good on that spot, but it is good to consider a double crimp yes.
Re: T5h/1 - additional wire beam?
Ok, thanks! So I should to buy 000979129 terminal?