Page 2 of 5

Posted: Thu Jul 26, 2007 4:46 pm
by polo_dude
excelent guide!!..also put a set on mk5 rears on.very pleased :D :D

Image
Shot with W880i at 2007-07-26

Posted: Tue Sep 04, 2007 4:58 pm
by Brick Top
Excellent guide. Took me about 35mins to get them all wired up and working. Just gotta make em fit flush by trimming them down a bit.

Posted: Mon Sep 10, 2007 10:42 pm
by Josh_polo
I really want to do this, but dont have the balls to start sanding and drilling into my car :(

Posted: Tue Jul 01, 2008 10:29 pm
by vw-po-low
i'll be doing this sunday after i've picked them up. aesome guide.

Posted: Mon Jul 21, 2008 11:01 am
by Mike
Anyone else finding a slight problem with the bottom right corner of the lights not quite fitting flush by about 5mm this is after sanding down the corners and enlarging the right hand fixing point?

Posted: Mon Jul 21, 2008 12:19 pm
by Polo96CL
Yes as far as i'm aware it is not possible to get it 100% flush unless you shave off some of the plastic on the thread which screws to the bodywork.

Posted: Mon Aug 25, 2008 11:13 am
by vw-po-low
Mine arnt flush, need a bit shaving off the edge. And the centre hole drilling a little bigger. :D

Image

Posted: Sat Oct 18, 2008 1:52 pm
by crodgers
Jus to add:- Make sure that the MK5 Rears have a seal on them like the mk4s do. I never caught this on. Ended up costing me a new central locking pump.

Posted: Wed Nov 12, 2008 8:04 am
by MiWi
My car was upgraded with Mk5-lights a couple of days ago... They look awsome! :)

Re: 6N - fitting mk5 lights (update with pics)

Posted: Sat Jan 17, 2009 1:29 pm
by surfon121
i need wiring pics asap i cant see the ones posted!! please

Re: 6N - fitting mk5 lights (update with pics)

Posted: Sun Jan 18, 2009 3:04 pm
by 6npolo
surfon121 wrote:i need wiring pics asap i cant see the ones posted!! please
x2

the pictures don't work for me either,

help will be appreciated.

Re: 6N - fitting mk5 lights (update with pics)

Posted: Tue Feb 10, 2009 9:15 pm
by david burton
Pics back up

Re: 6N - fitting mk5 lights (update with pics)

Posted: Thu Feb 19, 2009 8:53 pm
by RandonGUY
Do the Mk5 lights just have the one reversing light lilke the Mk4 ones?

Re: 6N - fitting mk5 lights (update with pics)

Posted: Mon Mar 02, 2009 11:41 am
by Naz
Yep- Only one reverse light on the same side

Re: 6N - fitting mk5 lights (update with pics)

Posted: Sat Mar 07, 2009 11:44 am
by Ben 6n
can anybody help me ??
does anybody know how to swop the wires around in the lugs? i cant seem to get mine out, ive fitted my lights and everything but all i need to do is swop the wires round as described to get them to work, does anyone know how?
id be very grateful for some advice,
great guide also :wink:
ben