How to fix the 6N2 ABS Signal Outside Specifications Fault

Post Instructions on DIY modifications here - use all information with caution!
Post Reply
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:
Contact alexperkins

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by alexperkins »

Potentially yes, but tbh i am so insanely busy its hard to say when it would be.

If you could get it scanned, that would be helpful to confirm the issue
Top
zoid
New
Posts: 8
Joined: Sat Jan 18, 2014 8:36 am
Drives: Polo 6n2 GTI
Location: Dorset

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by zoid »

Thanks for the reply, yes Ideally I need to get the error code, I assume I need a tool to read the OBD port, could you recommend a tool to do this, or a cable and software to read the fault codes?
Top
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:
Contact alexperkins

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by alexperkins »

https://www.ebay.co.uk/itm/305198936249 ... BMspGRi-di will do what you need. Only needs to be basic on the older polos

Vag-Com 409.01 is included
Top
zoid
New
Posts: 8
Joined: Sat Jan 18, 2014 8:36 am
Drives: Polo 6n2 GTI
Location: Dorset

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by zoid »

Thank you very much!
Top
Post Reply

Return to “DIY Guides”