Att: Ciclo... not sure where to put this....
Re: Att: Ciclo... not sure where to put this....
Link access fixed. Sorry about that.
- ciclo
- Bling Bling Diamond Member
- Posts: 7825
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Att: Ciclo... not sure where to put this....
I was finally able to review/study this thread with the ETKA and images on the net (somewhat confusing due to poor clarity).
It was just an incompatibility issue with the C ring you installed at the beginning.
I bought the 2 rings of the F version along with the 2 stalks suitable for my Golf 'FL' (mk 7.5) from the beginning, and once everything was coded, I did not have any problems related to the operation of the heated steering wheel. I remember that together with the ETKA I had to look at many images on the net (all possible ring/stalk sets) to decide that the right ring was the F version.
Everything that can be coded works perfectly (100%), that is, both through the button on the multifunction steering wheel and in the infotainment system (automatic -recommended, perfect-, heating levels, ON/OFF).You can see it in the videos I made in my thread.
The most interesting thing about this thread 'for the rest of the world' and MQB 'FL' models is that there is compatibility between the F rings and the original stalks, that is, that the heated steering wheel will work without changing the original stalks... hmm... in the same way you did it (NOT 100%?).
It was just an incompatibility issue with the C ring you installed at the beginning.
I bought the 2 rings of the F version along with the 2 stalks suitable for my Golf 'FL' (mk 7.5) from the beginning, and once everything was coded, I did not have any problems related to the operation of the heated steering wheel. I remember that together with the ETKA I had to look at many images on the net (all possible ring/stalk sets) to decide that the right ring was the F version.
Everything that can be coded works perfectly (100%), that is, both through the button on the multifunction steering wheel and in the infotainment system (automatic -recommended, perfect-, heating levels, ON/OFF).You can see it in the videos I made in my thread.
The most interesting thing about this thread 'for the rest of the world' and MQB 'FL' models is that there is compatibility between the F rings and the original stalks, that is, that the heated steering wheel will work without changing the original stalks... hmm... in the same way you did it (NOT 100%?).
Re: Att: Ciclo... not sure where to put this....
This is useful to know as I can attempt to sell the "spare" ring now. And it's nice to be able to contribute to the knowledge base on the F compatibility.
Once question I did have, you fitted a wheel with push buttons to one of yours, what "heated wheel type" did you choose for this in HVAC 08?
I have MIB3 and matched coding seen elsewhere to choose the "LRH Gen2 mod longpush" With this wheel there is no on screen button or control. I haven't tried switching it to any of the other wheel types as I'm terrified to touch it after my ordeal. But I did notice when messing about that "LRH Gen2" gave the on screen button. Is this what you selected? I assume I can't use this?
Once question I did have, you fitted a wheel with push buttons to one of yours, what "heated wheel type" did you choose for this in HVAC 08?
I have MIB3 and matched coding seen elsewhere to choose the "LRH Gen2 mod longpush" With this wheel there is no on screen button or control. I haven't tried switching it to any of the other wheel types as I'm terrified to touch it after my ordeal. But I did notice when messing about that "LRH Gen2" gave the on screen button. Is this what you selected? I assume I can't use this?
- ciclo
- Bling Bling Diamond Member
- Posts: 7825
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Att: Ciclo... not sure where to put this....
In the following link you can see the Coding that I applied at that time... viewtopic.php?p=589445#p589445
This is my current coding for HVAC 08:
This is my current coding for HVAC 08:
Code: Select all
Byte00:
0000 0000 ($00)
Byte01:
0000 0010 ($02)
Byte02:
0000 0000 ($00)
Byte03:
0000 0011 ($03)
Byte04:
0010 0000 ($20)
Byte05:
0000 0001 ($01)
Byte06:
0001 0000 ($10)
Byte07:
0000 1101 ($0D)
Byte08:
0001 0001 ($11)
Byte09:
0001 0101 ($15)
Byte10:
0000 0000 ($00)
Byte11:
0100 1100 ($4C)
Byte12:
0000 0000 ($00)
Byte13:
0001 1000 ($18)
Byte14:
0101 0100 ($54)
Byte15:
0010 1010 ($2A)
[LN]_Vehicle variant: [VN]_Short rear (multivan)
[LN]_Chassis version: [VN]_A_platform
[LN]_Brand: [VN]_VW
[LN]_Steering side of vehicle: [VN]_Left-hand drive vehicles
[LN]_Type of fuel: [VN]_Petrol
[LN]_type_of_drive: [VN]_combustion_engine
[LN]_Number of cylinders: [VN]_3 cylinder
[LN]_Roof: [VN]_Standard
[LN]_Save air recirculation status at terminal 15 off: [VN]_resttime_dependent_storage
[LN]_Credit_circulating_air: [VN]_Not_activated
[LN]_glazing: [VN]_glazing_green
[LN]_Additional_Heater: [VN]_not installed
[LN]_Auxiliary_heating: [VN]_not installed
[LN]_Sunlight_sensor: [VN]_verbaut
[LN]_cinematics_ram_air_air_recirculation: [VN]_air_recirculation_ram_air_flap_positioning_motor
[LN]_refrigerant: [VN]_HFO1234yf
[LN]_Climate_style: [VN]_display
[LN]_Climate zones second seat row: [VN]_not installed
[LN]_coolant_shut_off_valve: [VN]_not installed
[LN]_Camera heating: [VN]_installed
[LN]_Activating_start_stop_function: [VN]_aktive
[LN]_sensor_for_air_quality_outside: [VN]_installed
[LN]_sensor_for_air_humidity_inside: [VN]_installed
[LN]_sensor_for_air_humidity_outside: [VN]_installed
[LN]_remotestart: [VN]_not installed
[LN]_seat_ventilation_rear: [VN]_not installed
[LN]_operating_unit_rear: [VN]_not installed
[LN]_indirect_ventilation: [VN]_not installed
[LN]_Windshield defroster: [VN]_not installed
[LN]_steering wheel heater: [VN]_installed
[LN]_Heated_steering_wheel_steps: [VO]_mehrstufig
[LN]_Frequency_shift: [VN]_Not_activated
[LN]_Blower display during auto mode: [VN]_activated
[LN]_Blower_characteristic: [VN]_Setup_normal
[LN]_Temperature_setup: [VN]_Normal_setup
[LN]_fresh_air_blower_front: [VN]_According to function preconditions
[LN]_Reinforced_overshoot_heating_mode: [VN]_Not_activated
[LN]_Heated_steering_wheel_automatic_mode: [VO]_Aussentemperatur
[LN]_Compressor_start_reduction: [VN]_activated
[LN]_Seat_Heating_rear: [VN]_not installed
[LN]_Reduction of window misting outside at high humidity: [VN]_close over characteristic
[LN]_Blower_logic_manual_adjustment: [VN]_Blower stage, absolut
[LO]_Heated_steering_wheel_version: [VO]_LRH_Gen_2
[LN]_menu_seat: [VN]_display
[LN]_magnetic_clutch_air_conditioning_compressor: [VN]_not installed
[LN]_personalization: [VN]_activated
[LN]_Filtering interior air: [VN]_installed
Re: Att: Ciclo... not sure where to put this....
Thanks, once the PTSD subsides I'll have a play with the steering wheel types.
- ciclo
- Bling Bling Diamond Member
- Posts: 7825
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Att: Ciclo... not sure where to put this....
...feel free to ask me here about any other coding/adaptations you need by then.
-
- Silver Member
- Posts: 494
- Joined: Wed Dec 07, 2016 8:34 pm
- Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
- Location: Foothills of Nilgiris, India
Re: Att: Ciclo... not sure where to put this....
Hi Mike.. did you ever wonder why 5Q1 "c" slipring didn't work for you?
Re: Att: Ciclo... not sure where to put this....
As per Ciclo’s post the assumption is it wasn’t compatible and that software version F is required.
Happy to sell it to you if you like
Happy to sell it to you if you like
Re: Att: Ciclo... not sure where to put this....
My wheel came from a T-roc so I’d suggest getting an F version if you can. Use the sheet I shared prior to identify an assembly with the F spring then search for that code as well. I picked mine up for £60!!
-
- Silver Member
- Posts: 494
- Joined: Wed Dec 07, 2016 8:34 pm
- Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
- Location: Foothills of Nilgiris, India
Re: Att: Ciclo... not sure where to put this....
It doesn't matter from where the wheel comes from!
I did my own internal research on sliprings before you posted your problem. This 5Q1 C slipring is peculiar due to the fact that, it was installed with combi switch in which Cruise control buttons are installed in stalks ( DE/DG/DH etc..) and not on wheel buttons.
5Q1 B/F/K/L.. heated these sliprings are compatible with combi switches in which Cruise buttons are from wheel
Re: Att: Ciclo... not sure where to put this....
Interesting. The cruise functions on wheel worked fine, just not the heat.
Lesson learned.
Lesson learned.