Page 1 of 1
EPC Light
Posted: Sun Apr 07, 2024 7:14 pm
by cjbmc55
So my EPC light came on about a week into owning the car (55 plate 1.2 9n3 on approx 86k) The car still runs and drives great. it has a small hole around the flexi (MOT advisory) so i’m unsure if the light is due to the front or maybe even rear lambda sensor. i’ve tried 2 different OBDII scanners without any code showing which has made me really wonder. my EML hasn’t came on.
Wondering if anyone has had similar issues and can help. I can give any extra info if needed
Thanks
Re: EPC Light
Posted: Sun Apr 07, 2024 7:33 pm
by Maarten
Do your brakelights work?
Do you have cruise control? If yes does it still work?
Re: EPC Light
Posted: Sun Apr 07, 2024 7:36 pm
by cjbmc55
No i don’t have cruise control, i wish i did haha
yeah my brake lights still work
Re: EPC Light
Posted: Sun Apr 07, 2024 8:03 pm
by Maarten
Oh haha.
Did you check all fuses?
Re: EPC Light
Posted: Mon Apr 08, 2024 10:49 am
by cjbmc55
I haven’t but i’ll get that done
If memory serves me right my rear registration plate light fuse went and i replaced it then my EPC came on shortly after
Could be coincidental
Re: EPC Light
Posted: Mon Apr 08, 2024 5:19 pm
by cjbmc55
Thanks a lot for the help, i ended up fixing it. the person i got to check the brake lights last week said they were working it turns out it was the running lights they seen (ridiculous i know they are never being trusted again haha) i got someone else to press the brake today while i looked and they weren’t working. a quick trip to euro car parts in my mothers car, 13.49 and a 5 min job later it was fixed and the light is off.
So it was definitely the brake switch
Thanks again
Re: EPC Light
Posted: Mon Apr 08, 2024 7:14 pm
by Maarten
Glad you found the issue, brakelight switch is a common problem on the 9N/9N3