UK-POLOS.NET - THE VW Polo Forum

Holder for the footwell lights - are this part of the holder for BCM or is it a separate one ?

In Ekta it seems as a part of the BCM holder but I’m not sure (need it for another project then Golf)

When you get bored with the white LEDs, check out the LEDs from Audi A4 B9 (and other models). Then you have the possibility to get 30 colors controlled from the infotainment. All lamps require an extra wire for LIN-bus and permanent supply. Your BCM should be ready 👍 All lamps from A4 B9 including ...

Regarding humidity sensor, I'm not sure your sensor has humidity sensing. This is mine: Subsystem 1 - Part No: 5K7 955 547 Component: RLHS 220816 0 42 0106 Coding: 0714DD I'd recommend to fix the other errors as far as you can (i.e. the error in the 61 module, and 03). Have a play with the adaptati...

Hi, For a long time I've had some errors on my Polo and now it's time to figure out why... 1) Address 08: Auto HVAC (J255) says there is an error. Looking in Address 09: Cent. Elect. (J519) it's because of the "A/C Humidity Sensor (G260)". However the BCM fully recognizes it: Subsystem 1 -...

Wouldn’t it be better just upgrading to AID.. then you are ready for pACC as well

iichel wrote: ↑Fri Jul 17, 2020 11:48 am I think index B will add direct TPMS (address 65) to your gateway.

Years ago I’ve upgrade from 6R0 BCM to a 7E0 and everything works perfect.

What would I’ve gain from upgrading ?

I have full MFD... does anyone have a list of new supported codings / cool features ?

iichel wrote:Usually I pay about 25% more in Switzerland compared to Germany

Cool! In Denmark we pay around 50% more

Last week I’ve desperately need a small repair wire. 15€... do I need to say more? [emoji23]

You've got a point... However then I'll just wonder what's wrong with the coding in the gateway...

A 2nd question: Anyone knows how to turn on the rear lights during daytime?

Hi, Below is a complete scan from my car this weekend. I've retrofitted the 7E0 937 090 BCM, but my problem is the 04, 37 and 77 module. They are not in the car and in the gateway installation list they are NOT checked. Why does they show up? Saturday,11,November,2017,15:31:26:21096 VCDS -- Windows ...

iichel wrote: ↑Tue Sep 26, 2017 5:37 pm I've unlocked a few new messages on the IC:
Assistance menu, front assist and GRA_high warning
All you got to do is install 6C0 ABS and T6 radar

Now I really wants to have DSG instead of manual transmission...

6C0 614 517 H / M / Q / T ? All of them supports PR-8T3 + 8T5...

that cluster SW version 10xx can only be code Online via Dealer. there is no tool for cluster made after 2014 I can confirm that that's true. I've talked to several people and they all say the same. That's a shame - it was a good deal but I've have to cancel it because it's basically impossible to ...

Adam87 wrote: ↑Tue Aug 22, 2017 7:15 am Do you have a way to read the eeprom yourself? I can set the picture in the cluster for you, bigger problem is the immobiliser

Of cource I've have to find someone to take care of the immobiliser

I've just bought a new user cluster - could that be the solution of the RDK problem not showing in the cluster?

Now I just have find someone in Denmark to change the eeprom so it starts to look like a Polo

Cluster - one of the expensive parts... how much did this project cost you? (Both time and money)