UK-POLOS.NET - THE VW Polo Forum

2015 polo in asia (malaysia, china, russia, india) is pq25 = polo 6R, but with some items from the polo 6c like bumpers, power steering etc.

it's not super easy, no. i've done it a dozen times now and it does make a big difference.

well, yes, it is certainly possible, this what you need to do: remove your abs9.0 pump re-arrange the wires in the plug as needed fit esp9.0i pump bleed brakes fit 6r0 slip ring with steering angle sensor wire the steering angle sensor place ESP disable button and wire it up code the ESP pump calibr...

you probably need to flash the high beam shortly

Yes sorry

I will check again in the spring (April). My winter wheels do not have direct TPMS and the winter has started here. I am very sorry I cannot be of any help right now.

no they are different.

standard bumper is 6C0945105B and 6C0945106B, while the gti rear bumper has 6C0945106A and 6C0945106A

If they replaced the EGR for a P2563, then I'd have a good conversation why they did it. It's clearly a turbocharger system fault (not just the TC, but the vacuum system or piping).
So check VGT, vacuum, wiring, N75, sensor on the turbo.

as far as the headlights go, they should be the same for the polo 6r and 6c (both shape and connector).
for the tail light, there is a difference. i see no reason why they it should not fit, just make sure you ask for a 6R tail light.

I did it this way so you can retain the OEM connector for the tail light on both sides.

For sale is a BCM 7H0 937 089 F (BCM Max for bixenon, auto light, etc).
I got it as a trade-in on a retrofit.

It is for sale for €75 + shipping from The Netherlands

Contact me via PM if you're interested.

Solder it to pin 5, place number two in your picture.

should be a direct swap

Isn't it just in a dpf regen?

Yes in your case you should wire up the mfsw as per factory wiring diagram, code the mfsw as you would and set byte 18 bit 0 to off and bit 1 to on