UK-POLOS.NET - THE VW Polo Forum

271587710788 Item on eBay or 201103230356. Green connector plugs straight into a spare slot on the harness (rear of stereo). You just need to route the cable behind the glove box, up the pillar trim into the space behind the interior light. If you haven't installed a mic previous, you'll need to bre...

Let's see a pic ! If you have a friendly body shop probably around the £200 mark. I bought a beaten up rline bumper of eBay. My local body shop repaired all the cracks and holes and re - sprayed for £200. I have no idea of that's good or not but looks like new. Most places will say they have to resp...

Much easier with trim removal tools. I just levered the trim away from the top edge. Pushed another plastic pry tool near to the top fastener then applied pressure with the tool and pull with my hand. Once you've got the first one out the others are easier but apply pressure around the fastener rath...

Thanks, really helpful. I'll have go in the morning.

Rob

Hi
Me again. Quick question. I need to pull some cables through into the engine bay from the glove compartment area.

Does anyone know an easy route ?

Thanks

Rob

Hi Anyone seen this airbag fault before ? It came up yesterday after removing the airbag. Battery was disconntected for a while prior to removal. 9437211 - Igniter for Driver's Airbag B1000 1B [137] - Resistance Too High MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 0000...

Perfect, thanks.

First stage of install went well today. Has one loose wire on a sensor which I managed to pinpoint with VCDS. The whole connecting to the canbus was simple plus adding the switch. However I've got a naughty airbag fault now which I can seem to clear. Apparently it's a fault which will clear eventual...

Hi All I've got to take the front bumper off tomorrow for my PDC install. Is it a simple 3 bolts on arch, a few underneath then prize it off or do you need to take the grill and lights off first ? Also, when making holes for the pdc sensors what's the best way to do it ? pilot hope from inside, mask...

Great replies ! Thanks

Hi
I'm sure this has been asked before so sorry for repeating the question but how many litres of oil will I need for a full oil change on a 1.2 TSI?

Any oil recommendations ?

Ta

Robert

Hi All So my genuine parts VW Polo 6r front and rear PDC / OPS arrived today. Here it is in all it's glory with my RossTech VCDS for coding. Looks pretty easy, soldered into the cambus at the steering wheel, new button on the dash, drill a few holes and hey presto. http://i300.photobucket.com/albums...

Hazzy days gave me a price for cruise control on mine for £295 fitted. Mines not a GTI and has the standard DIS.

They base the quotes on your chassis number, so I'm not sure how it can be do different.

Cool....I've got it.

So, two options with or without DIS.

So mine is a highline 6r but doesn't have the full display like the GTI.

so which one is it ?