UK-POLOS.NET - THE VW Polo Forum

thanks a lot

Impossible to do it every time on one side each ?

It will not be possible to compress the damper in this way ?

Okay so I'll lift the car and try to do it without disassembling the wheel & bottom screw .

just lift the car + disassembling the two upper screws + compress the damper.

thanks!

Are you sure this is possible?

just compress it after disassembling the 2 upper screws?

thanks for the reply . please look at time 1:39 in this video https://www.youtube.com/watch?v=__UVcJNpTbU can you tell me if its possible to expouse the head of the shock without disassembling the bottom screw ? i just want to adjust the rebound Without disassembling the bottom screw.. only the two ...

anyone ??

Hey guys, I'm looking to adjust my KW STREET COMFORT coils "on the fly" by accessing rear REBOUND allen key adjustment hole; which is located inside the top of the rear strut. Ideally, I would like to drill a small hole through the body of my car and then access the strut from the trunk by...

It does not look as simple as it seems..

in the video he removed the panel (trim) and 4 screwes .
thats all ?

hello

i have polo gti 2013 (6R)

Could anyone give me some advice on how to remove center vents please?

is there any pictures / manual installation ?

thanks .

just remove the panel + 4 screws and pull out the radio ?

https://www.youtube.com/watch?v=fyqaXV2eXwE

yes. they are heavy.

Is it worth replacing to lighter wheels ?

i consider to buy 17 inch ultralegerra wheels..

but i am not sure yet..

12.5Kkg for 17 inch ?

are you sure ?

where did you find this information ?

thanks.

Does anyone know the weight of a standard 2013 POLO GTI wheel, without tyre.

215/40/17

thanks

hi

i have 2013 polo gti

anyone knows what is the weight of the OEM 17" Monza alloys each ?

thanks

hi all I wanted to ask how much HP I could get with this setup on custom tuning ? 2013 Polo Gti 1.4 twincharge VWR intake MILLTEK full exhaust WAGNER competition intercooler NGK 2667 BKR7EIX fuel type 98 STOCK TURBO *I currently have shelf software (stg 2) And I dont know if should switch to custom ...