UK-POLOS.NET - THE VW Polo Forum

to all people that had difficulties with the BCM coding, if nothing is connected to the BCM C15, means that the LinBus on that Pin is Off and it is necessary to activate it.

BCM byte 20, bit 1 - Roof_lin (in VCDS) needs to be active to enable that LIN BUS.

ciclo wrote: Fri Oct 20, 2017 11:54 am

n4s wrote: Fri Oct 20, 2017 10:13 am If you want some help with investigations I will help you the best I can!

Thanks Ruben, we have to wait at least a month (tools, ECUs, etc), will be in touch by email, I want you to know the whole process with my Simos.

Yeeeee

Fernando, been reading last posts and thank you for the nice words.

In my case the Acivation of GRA_high wasn't enough because sending GRA info out of Engine was disabled. So in my case both had to be activated, the GRA-High Flag and enable CCS "output" message.

It exists the possibility that the ...

Really "love" what you did to the car.

I have finally understood why Cruise control wasn't displayed. It's deactivated in Engine Flash

A bit of the story here:
http://www.mytiguan.com/index.php?/topic/30089-question-to-cruise-control-retrofitters/

Also been reading about your CCS test with ...

Really "love" what you did to the car.

I have finally understood why Cruise control wasn't displayed. It's deactivated in Engine Flash

A bit of the story here:
http://www.mytiguan.com/index.php?/topic/30089-question-to-cruise-control-retrofitters/

Also been reading about your CCS test with ...

I understand but you have to pay for many things:

like
https://shops.volkswagen.com/de_DE/web/zubehoer/p/sprachbedienung-fuer-navigation-discover-media-dialog-spracheingabe-5g0054802a-10?category=4274:904_VWZ_OZ:Category

Component Protection removal

https://shops.volkswagen.com/de_DE/web/zubehoer ...

I believe the tpms receiver D and F use different sensors. The H I believe already has Component Protection, so only works with clusters with CP.
Golf 7 has many upgrades with CP. dont know if will be easier...

I checked ECU 03F906070GA (that I found in the web), it's a Simos and the patterns inside dont look the same as for Bosch ECUs, so is not possible to have solution like for the Tiguan.

Apparenty this GA version is from Golf 1.2 TSI, so probably this one has the CCS display active. What I would ...

firegrafik, share the bin file when possible, I will take a look and tell you if I have knowledge for that one.

SGO files are usually parts of flash that are going to be updated, and it's also encrypted.

What I need is a binary file (original)

I only studied EDC17, I need to check one ECU file, the ideal would be to find 03F 906 070 GD original file to check.

Even inside same controller, between SW versions the things change Address, it's not that easy to find.

Don't know if Simos was made in the same way as the Bosch, need to check.

Thanks!

I didn't flashed new soft, I just changed some bytes in my soft.

The ACC is already activated but I need new steering controller. I can assure you that it works, you can see it in my friend car:
http://www.vagarena.fi/index.php?topic=31324.msg558184;topicseen#new

Me and my friend (JMB123 ...

Really "love" what you did to the car.

I have finally understood why Cruise control wasn't displayed. It's deactivated in Engine Flash

A bit of the story here:
http://www.mytiguan.com/index.php?/topic/30089-question-to-cruise-control-retrofitters/

Also been reading about your CCS test with ...