UK-POLOS.NET - THE VW Polo Forum

Hello

I want to begin with a new project, chiptune the car by myself.
The only problem is that is dont know what reader/writer i must have.

Kess v2 doesnt support the ecu of a 1.2 tdi bluemotion polo.

Hello

I am planning to change my steering wheel tomorrow.
can someone tell me if these parts are the right one, the steering wheel fit and my airbag also but do i have the right cable and slip ring.

cable
5K0.971.584C
slip ring
6Q0 953 503 EC

Also the +12v cable i can put it to the light switch ...

I put all the original lights back and now no errors.

Thanks

code rns correctly


Oke, i did something wrong i geuss otherwise you wont say that.
Can you help me a little bit in the direction what i should code.
I thought i install the radio and put the pin of the radio and it will works correctly.

the values of the speakers is set correct, the speaker ...

Hello

I have a custom entertaiment in my car with own amplifiers and speakers.
Vcds there is an error in the speakers.
Is there a way to exclude the errors in the radio with vcds.

Thanks in advanche

Edit: i set the rns coding. byte 4 to inactive but the eroors keep coming back.

Wednesday,06 ...

Hello guys


I have a little problem, tha last weeks i was experimenting with canbus led, but i have nothing but failures so i set it back to halogen.
Now i have no error but on the dash is still my light on from the bulbs.

What can i do about it.
I have clear the errors multiple times but it has ...

Hi

I thought it was factory default, but proberly there is factory mode.
now i have bought an genuine cable and wednesday the delivery guy is gonne bring him.
My bcm is a 88 they should do the trick right.

Looking for the wrm with you're or iichell S numbers.

Edit:Today i bought 2 wrm 6R0959801BD ...

oke, thanks for youre help anyway.
I dont give up, is it possible that the motors with software 9610 are fault beceuse then i look for the same motors u have.
S8612 u have right?

Is it safe to reset the bcm to factory defaults?

I was thinking the mirrors are Chinese, does make that the problem.
It is working(between the short tine) so I don't think so.

If they're VW OEM there is no problem.
If they work, they're fine.

Hello again.

Now i got a little bit of a headache from the mirrors.
Yesterday i was at the scrapyard ...

First of al thanks for the reply.

I have tried the last code but it make unfortunately no difference, I have tried them with my original coding in the back and the one you give.

I was thinking the mirrors are Chinese, does make that the problem.
It is working(between the short tine) so I don't ...

Hi ciclo

Thanks for you're help but it make no difference.
I have googled for 1 evening but I can't find it.

I thought of was a minuten but after 20 seconds or so of won't work anymore.

hi

Sorry you're right.
so i have it here.i hope it can be fixed because this retrofitting is great upgrade in my opinion.

Tuesday,15,May,2018,14:23:33:04550
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 15.7.0.2
Data version: 20150820
www.Ross-Tech.com


VIN ...

Helo guys

I place folding mirrors in my polo 6r 1.2 bleumotion 4doors with the guide from ciclo.
The motors i used is with softwarerversion s9210 the coding i used is
0200A3(13 pin motor)
1000AB(7 pin motor)

When i fold the mirrors and put the key in the contact they unfold but only till about 1 ...

Hi ciclo

I have it now for a few days and it is a nice retrofit but there appear a little problem.

When I close the car and come back in a minute the mirrors unfold with the key.in contact but when I stay away more then about a minute they won't unfold, only when I switch to fold and then unfold.

Yeahhh it works thanks for the how to and reply's.

Is it possible that my mirrors fold out when i open my car.
the problem was that i had a 2 door motor.