UK-POLOS.NET - THE VW Polo Forum

This method don't work for me
I need EEPROM coding
Like which byte to change for needle sweep, and which for needle light

Hi everyone

First of all, I saw topic about this there, but I can't understand something.

I have Polo with midline cluster and MFA activated.
In VCDS it's impossible to turn it on, and I know I have to code it in EEPROM.

So here is my question:
Could you give me a list which bytes I have to ...

Hi,
I changed BCM grom 085 to 087, but I couldn't adapt key because all labels are N/A. Ive got some kind of China remote, and now I want to use OEM remote.
So, I'm looking for BCM pinout to check if any wire from remote control and central locking isn't cut or removed.
Have someone something like ...

I've got new key, but still without cuted blade and immo. I were trying to adapt it, and I spotted one interesting thing.
When I'm going to adaptation channel 00 everything is ok and I can reset keys, but on channel 01 in each label there is only B/D (polish version, something like"no info"). Anyone ...

I tried to take out cluster but I'd didn't change anything. I was also trying to code key from Skoda Rapid (3T0.....), But I couldn't adapt him at all. I'm wondering if BCM is ok, and after an opinion from another person I'm wondering if this BCM is from Polo, or it's from Ibiza what can make ...

Did you transfer all the codings and adaptation maps from the old to the new bcm?

I transferred coding, but there wasn't really any to change in adaptation :?: The most wondering part for me is that I couldn't open car by VCDS output test, there is only option for locking, but locking/unlocking ...

if not mistaken, you will need to relearn the key with the new bcm to match those. There’s specific process in vcds. But im not sure since you said its oem remote.


Sent from my iPhone using Tapatalk


If you are thinking about adaptation in VCDS by pressing key on remote, I already tried this ...

Hi,
yesterday I was trying to upgrade my BCM from 085 to 087( I'm planing to add CCS). I have central locking with non OEM remote control added. Problem is that when I changed my BCM everything works fine, there is new text on cluster saying "SAFELOCK" every time I'm taking key away and I can lock ...

MQS - Micro Quadlok System - 0,63mm

https://www.a4-freunde.com/showwiki.php?title=Pins+und+alles+was+dazu+gehoert#3+Kontakteuebersicht

https://www.a4-freunde.com/attachment.php?attachmentid=288923&d=1415539780


Could you tell me are this pins on both sides of cable? Or there are another on ...

Hi,
could someone tell me numbers or size of pins for MFA in polo 6R? I have to add wiring for new stalks and MFA, like this on photo below

Thanks

Hi,
could anyone give me screenshot of CCS wiring diagram for Polo 6R 1.2 CGPA 51kW 2010.
The most important for me is to get pin numer for CCS in ECU, because i coulnt find it for ma engine.
Thanks for help!

Yes, i was wondering about rear seats, but now I know it's impossible.
Last question is do I need wiring for MFA? I found for CC, but I couldn't find wires for MFA

There is an autoscan :)

Przebieg: 152710km Numer naprawy: Polo
Typ podwozia: 6R-VW25 (6N0)
Skanowanie: 01 03 04 08 09 15 17 19 25 44 56
VIN: WVWZZZ6RZBY054307 Przebieg: 152710km
01-Silnik -- Stan: OK 0000
03-ABS/hamulce -- Stan: OK 0000
04-Kat skretu kierow. -- Stan: OK 0000
08-Klimatyzacja -- Stan ...

I think there are some wirings for sale. If you are good with cables you could perhaps try to make your own. Otherwise I can make you a wiring as well.

Seatbelt display should already be available. Do you have a diagnostic tool such as VCDS?


Yes, I have VCDS but I couldn't find option to turn ...