UK-POLOS.NET - THE VW Polo Forum

It looks to have rectified the Sensor 2 issues, so I'm wondering whether it may be an issue with the Sensor 1 upstream sensor.

I may have a look tonight, do you know exactly where it is located?

I've now put a 10a fuse in socket 28 and am receiving the following fault codes, no engine management light after 3 startups.

Any further advice?

According to the following:

https://drive.google.com/open?id=0BxYPV ... m56Y19tOE0

The lambda sensors should be house in either fuse 8 or 28. Mine doesn't seem to have a fuse in either...

Thanks for your help!

I've just checked all the fuses under the steering wheel and they all look to be fine, which is frustrating as I hoped it would be a quick win!

I suspect it's something between the sensor and the fuse that is causing the issue. Possibly some deterioration of wiring?

I have just ran it through my diagnostic and have the following fault codes:

Hi new member here!

Just wondering if any of you guys can help. Recently I've had the engine management light on, after taking it to the garage they advised that there was an issues with the O2 sensor Bank 1 Sensor 2, I believe this is underneath the car?

The sensor had been changed last year as ...