UK-POLOS.NET - THE VW Polo Forum

Hello Sanket and Ciclo, Just for the information I only provided the harness from BCM to Fuse Box, Can bus (BCM to Instrument Cluster), and The harness with red connector. Sanket apologies for the mistake on my part regarding the dimmer and rear fog lights. Hope that is sorted now. Also please check...

Installation of OEM Passat Cabin Light. IMG_1235.JPG Part Number: 3BD 947 105 IMG_1242.JPG Wiring for connecting the Stock Roof Light connector to Passat Light (Ignore the other wiring mess as that is for Ultrasound Sensor) IMG_1244.JPG Ambient Light wire connected to Headlight Switch IMG_1247.JPG

Hi everyone, Thank you ciclo, patil and iichel for all the help. But unfortunately the ODIS Engineering I have is not able to edit the EEPROM. Maybe its because of the device or software, not sure about it. Now need to search someone who has VCP so that I can get this issue rectified as soon as poss...

Hi ciclo, Yes i did use memory cell options 10.02 for read/write eeprom. But it doesn’t seem to work. I am able to read eeprom with 84244, but not able to write it. It shows the above error. Have used end of assembly mode also but no success. Currently using ODIS E 14.1. Is this a problem? Should I ...

Ohh i dont have the high beam issue if i use 67 in byte 18. The only issue i have is parking lights not working with headlights. The address 2B03 is correct the for pwm control of parking lights? Since i had odis I thought will check the value of the same. As i read on this forum that if value is no...

Hi iichel,

As per your thread which you have linked, the above address is for pwm control for parking lights and pwm control for tfl lights?

Sorry have no idea about eeprom stuff thats why so many questions.

Regards.

Hi Ciclo, Sorry for late response as was not keeping well. So i did try the above code you mentioned. Still no parking lights when headlights are on. Also with the headlights on when I use highbeam flash function the low beam flickers once to twice. Sometimes the right side sometimes the left side. ...

Thank you ciclo. Means a lot. From what i could read on this forum about led headlights. I have come to know this that you need BCM 8IT for Led headlights or you need to parameterize it. If you don’t then the Parking Lights wont work with Headlights and Parking Lights. Also if my BCM does not suppor...

Three scenarios best way i could explain it


Headlights switch 0 position and DRL are on



Headlight switch parking lights position



Headlights on(Auto and manual) and parking lights are off

Hi, So i today did the installation of 6C GTI Lights, along with T10 to T14 harness. Connected the necessary wires to BCM. Tried to do the coding, but there is a problem the Parking Lights are working in the DRL(When headlight switch is off) Second problem proper parking lights are not working when ...

Hi, I and my friend are trying to do the BCM max installation on his 2013 Polo 6R 1.2. Previously he had a 086 BCM. But then recently we bought a used 7E0 from ebay. Everything works perfectly after connecting the instrument cluster to the BCM with he new canbus wire. The only problem is that we are...

Hi adityagttsi. Looks great! Enjoy it! I could no longer live without the TPMS, the tire pressure is the first thing I check in the MFD after traveling about 100 meters, it gives me peace of mind 😄 to face any trip without worries. Once the tires have warmed up, I again observe the increase of pres...

favi wrote: ↑Mon Oct 24, 2022 3:13 pm For sell BCM 7E0937090E
Price: 150 euro/$ + ship cost

Hi, is this still available? If it’s available please let me know as I am interested

Hi firegrafik Are the wrms still available? And do they support auto fold function? They are for LHD Polo. For RHD Polo you need below WRM's which supports mirror autofold with keyfob. 6R0 959 802 BH 6R0 959 801 BC Hi Patil, Is there anyway I could source them? Or could you source it for me?

Hi firegrafik

Are the wrms still available? And do they support auto fold function?