UK-POLOS.NET - THE VW Polo Forum

Ik wilde een probleem oplossen voor een vriend maar het probleem ligt toch anders dan ik dacht. Volgende zaken zijn vervangen nadat ik de foutcodes heb gezien: Dit gaat om een Polo 6R 1.6 CAYA TDI 55KW - Luchtmassameter - Druksensor roetfilter De lampjes die branden is te zien in de afbeelding, nada...

You might not have +30, my advice is connect your + at your quadlock connection on the radio.

Yes that is possible, right know I didn't get the fault code and drove it everydat since the post. it seems like when its could outside and start it.

The battery is from factory, from 10/2015.

Good, 14.15 V or something, how do i know the battery is good?

I reset the code and then make a full scan, I forget to make the full scan before I was restting it, the language is dutch Chassis Type: 6R-VW26 (6C0) Scan: 01 03 08 09 10 14 15 17 19 44 5F 69 Chassisnummer: WVWZZZ6RZGY099627 KM-stand: 136062km 01-Motor -- Status: OK 0000 03-ABS Remmen -- Status: OK...

Hi All, When I bought my car at the beginning the A/C was out of gas, the reason was because the condenser was stuck so i replace it. Everything is working fine, but when i check on VCDS I see 1 fault. When I delete the fault, it will NOT coming back also when i turn on the A/C and turn it on and of...

Thanks i will do it.

Yes i soldering it on the quadlock +30.

I install OEM golf 7 camera logo on my polo without any issues thanks everybody for the previous problem

After steering rack adjustment i didn't hear the noise anymore.

Hi,

I have the same problem on mu 6C, when the car is cold I hear the sound when i drive 30km i didn't hear it anymore only when its cold. I adjust the steering rack preload, I will check if this solve the problem.
(Not my video)
https://www.youtube.com/watch?v=Wn76vbGmFTY

Okay got it working at front of car. However I’ve put the bracket with the camera in the registration light but how do feed the cable off the camera into the boot from the bracket? I push the cable through but can’t seee where it’s coming out? Remove this You will see a round rubber thing with wiri...

LEGEEENDDDD, it works man thanks

Can I just say that I'm a bit shocked by the way you're running this red wire to a fuse. Come on man, you're better than this Iknow that this is not ok, if my OEM flip camera is deliverd i will do it the correct wise. But know nothing is working and my OPS also i opened a new topic. Maybe you guys ...