UK-POLOS.NET - THE VW Polo Forum

iichel wrote: Sun Jul 11, 2021 9:12 pm If there are no warning lights, it's fine. Fuse layouts do change over time and according to equipment. So don't worry about it too much.

Thanks again mate.

It’s in for a service next week anyway so any ABS faults should show up on that, just wanted to be sure.

Following my last post about wipers not working, I got the fuses swapped over and got that all sorted again.

I then decided to take some time to look over the fuse diagram pinned here and do some learning. I noticed I don’t have a fuse in 47, where there should be a 30A fuse for the ABS system ...

Some time later, when you have time, maybe consider moving where you are picking up an earth to an earth post which should be behind the pick panel at the driver's feet, if you do that you will be moving the earthing point away from a not very suitable point - that bolt looks like it passes ...

It was 45, I think I’d take it out and put it back in 46.
Thank you so much, you don’t understand the level of abuse from my partner you’ve saved me haha.

Just so I know, the bolt I used for grounding next to the clutch, is this safe to use? It was working fine prior to me un-doing the work I did

Bolt used for ground.

Pretty much what the title says.

I have a 65 plate 6c, this morning I attempted to hard wire a Mextbase dashcam using the piggyback fuse.

Now my front wipers won’t work, neither will the pump for front or back. I’ve checked all the fuses I’ve touched and the wiper fuse with no luck.

Here’s a ...

Hey all, first post here so apologise if I miss anything.

I’ve got an 03 plate 9N, purchased as a first car about a year ago. Ever since I’ve had it, I’ve noticed the aircon never seems to turn off. Even with the fans set to 0, I can feel hot air blowing in to the cabin, and if I adjust the ...