Hello, I’m wondering if anyone has experience of this?
For a little while now I’ve noticed on start up the engine rattles, I suspected the timing chain and was gearing up to replace it.
Then the other I started it after it had sat for a week, it made a terrible noise on start up and then died and ...
Search found 26 matches
- Tue Sep 03, 2024 4:46 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: 1.2 12v timing chain 2007
- Replies: 0
- Views: 3059
- Wed Aug 14, 2024 5:53 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Drivers side cv boot
- Replies: 0
- Views: 2677
Drivers side cv boot
Hello, just got an mot advisory on perished outer cv boot, drivers side. I want to get it done now, before winter as it looks like it might split any moment.
Just wondering if the shaft needs to come out or if it can stay on the car? Also should I replace the hubnut and circlip?
I guessing the ...
Just wondering if the shaft needs to come out or if it can stay on the car? Also should I replace the hubnut and circlip?
I guessing the ...
- Wed Apr 17, 2024 8:20 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Strange throttle issue
- Replies: 4
- Views: 1732
Re: Strange throttle issue
Does anyone know where ecu receives speed data from? I’m guessing it might be the speedo itself or is their another sensor somewhere?
Also how is it checked?
Also how is it checked?
- Mon Apr 15, 2024 5:12 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Strange throttle issue
- Replies: 4
- Views: 1732
Re: Strange throttle issue
I’m guessing this is an uncommon issue?? Any help would be much appreciated 
- Sun Apr 14, 2024 9:18 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Strange throttle issue
- Replies: 4
- Views: 1732
Strange throttle issue
Car is 2007 1.2
If I blip the throttle whilst the car is rolling say at 30mph the engine revs up way more than it should maybe up to 4500rom and hangs there for for a few seconds and then drops down, it quite disconcerting as you think it’s going to keep revving for ever!! But when the car is ...
If I blip the throttle whilst the car is rolling say at 30mph the engine revs up way more than it should maybe up to 4500rom and hangs there for for a few seconds and then drops down, it quite disconcerting as you think it’s going to keep revving for ever!! But when the car is ...
- Mon Apr 11, 2022 1:37 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Electric power steering whining
- Replies: 1
- Views: 2003
Re: Electric power steering whining
Well the mystery continues, the noise is actually coming from the headlamp unit, looks like it’s the headlight aim adjustment motor.
Also I’ve noticed a tapping noise coming from the headlamp on the other side!!! How on earth headlamps can cause so much trouble it a mystery!
So today I bit the ...
Also I’ve noticed a tapping noise coming from the headlamp on the other side!!! How on earth headlamps can cause so much trouble it a mystery!
So today I bit the ...
- Tue Apr 05, 2022 7:15 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Electric power steering whining
- Replies: 1
- Views: 2003
Electric power steering whining
Hello, strange one this! Car is 2007 1.2.
My electric power steering pump makes a whining noise but only when the lights are on???????
It’s definitely the pump as the noise comes directly from the pump itself and when I move the steering wheel the pump is quiet when working but noisy in its rest ...
My electric power steering pump makes a whining noise but only when the lights are on???????
It’s definitely the pump as the noise comes directly from the pump itself and when I move the steering wheel the pump is quiet when working but noisy in its rest ...
- Sat Jul 10, 2021 10:22 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Lights on warning buzzer
- Replies: 6
- Views: 3745
Re: Lights on warning buzzer
Yes rear doors work fine, both front doors are intermittent but mainly don't work at all.
Can the microswitch be taken off the mechanism or is it buried inside the lock unit?
I wonder if I could source the microswitches from RS spares or Rapid electronics etc ?
Can the microswitch be taken off the mechanism or is it buried inside the lock unit?
I wonder if I could source the microswitches from RS spares or Rapid electronics etc ?
- Thu Jul 08, 2021 12:28 am
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Lights on warning buzzer
- Replies: 6
- Views: 3745
Re: Lights on warning buzzer
Thanks for the reply.
Mine is a 5 door, is this a different situation to a 3 door?
Mine is a 5 door, is this a different situation to a 3 door?
- Wed Jul 07, 2021 11:34 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Lights on warning buzzer
- Replies: 6
- Views: 3745
Re: Lights on warning buzzer
Ahh, I wondered where the door switch was!
Is it possible this fault has sonthing to do with the passenger door? The passenger door doesn't work with the central locking, I have to unlock it with a key, I can't even open it from the inside, the only way it can be unlocked is with the key.
Is it possible this fault has sonthing to do with the passenger door? The passenger door doesn't work with the central locking, I have to unlock it with a key, I can't even open it from the inside, the only way it can be unlocked is with the key.
- Tue Jul 06, 2021 8:33 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: Lights on warning buzzer
- Replies: 6
- Views: 3745
Lights on warning buzzer
Hello, car is 2007 1.2.
The warning buzzer that sounds when you leave the lights on and then open the door appears to have stopped working. I ran the battery flat today
Any ideas would be great
The warning buzzer that sounds when you leave the lights on and then open the door appears to have stopped working. I ran the battery flat today
Any ideas would be great
- Wed Jan 20, 2021 7:48 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: How quickly should a 1.2 reach operating temp?
- Replies: 13
- Views: 3551
Re: How quickly should a 1.2 reach operating temp?
I suspected that might be the case but I wasn't sure if the temp sensor was sensing the coolant temp and it was the coolant that was taking longer to heat up as it was pure coolant this was giving misleading information to the ecu and gauge and maybe the fuel injection could be running richer than ...
- Tue Jan 19, 2021 7:10 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: How quickly should a 1.2 reach operating temp?
- Replies: 13
- Views: 3551
Re: How quickly should a 1.2 reach operating temp?
Ok I see.
Checked the actual coolant today using my hydrometer. The coolant seemed quite gloopy and the reading said it was protected to -60deg+!!!!!!
Judging by the amount I had to dilute the coolant to get it to -25deg protection I think the cooling system is neat coolant!
Doing some research ...
Checked the actual coolant today using my hydrometer. The coolant seemed quite gloopy and the reading said it was protected to -60deg+!!!!!!
Judging by the amount I had to dilute the coolant to get it to -25deg protection I think the cooling system is neat coolant!
Doing some research ...
- Mon Jan 18, 2021 5:35 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: How quickly should a 1.2 reach operating temp?
- Replies: 13
- Views: 3551
Re: How quickly should a 1.2 reach operating temp?
Ok so up to 75deg on the gauge the hose shoul be cold and soonish after that the hose will get warm/hot.
I suppose VW make the gauge stay still at 90deg to stop it wandering around and freaking owners out, personally I like to see things changing in real time so I can anticipate issues, what's the ...
I suppose VW make the gauge stay still at 90deg to stop it wandering around and freaking owners out, personally I like to see things changing in real time so I can anticipate issues, what's the ...
- Sun Jan 17, 2021 12:59 pm
- Forum: MK7 (9N3) Polo (inc GTI) - Years 2006-2008
- Topic: How quickly should a 1.2 reach operating temp?
- Replies: 13
- Views: 3551
Re: How quickly should a 1.2 reach operating temp?
CEL - check engine light!
The penny dropped in the end!
The penny dropped in the end!