UK-POLOS.NET - THE VW Polo Forum

what happens is, reverse light will receive 12V. if engine starts, battery voltage is 13-14V. BCM will control reverse light voltage from 14 to 12V. This is with a PWM process. The camera's power supply will turn into PWM and camera's don't like that. Solution is to change dimming value for reverse...

iichel wrote: ↑Tue Dec 12, 2023 7:25 am does it make a difference if you have engine off, and put car in reverse?

I didn't try that.
I will do that and post the results. I appreciate your interest and effort.

Second part ENG122227-ENG125811-Car_Function_Adaptations_Gen2-menu_auxiliary_climatization,not activated ,60 ENG122227-ENG125814-Car_Function_Adaptations_Gen2-menu_auxiliary_climatization_after_disclaimer,not activated ,60 ENG122227-ENG126995-Car_Function_Adaptations_Gen2-menu_auxiliary_climatizatio...

are you trying with engine on or off? does it make a difference? can you make an adapmap of 5f please? The engine was running when i tried this. I will post the adaptation map to 2 separate posts because it is too big to fit to only one post. I am starting from this post SW:6C0-035-869-F HW:6C0-035...

Well, Well, as I wrote earlier, I did the coding and looked into the adaptations channels. I found only this at the 5F module. https://i.postimg.cc/1fwCkG8K/20231211-191039.jpg I chose it, I ticked it and this is the result. https://i.postimg.cc/VSpXshT0/camera-new-coding.jpg I searched the adaptati...

Yes you need to code 5F in long coding and adaptation. Look for rvc. If you have Pdc, also code that one for camera and adaptation. Adaptation has a channel like 'visual assist for parking display' Very useful information, thank you. I don't have PDC. I will try to change the long coding to the 5F ...

I have already replaced the infotainment with Composition Color. And I also installed the pins on the unit plug. Number 6 and point 12 of the blue plug. Before https://i.postimg.cc/KRRqY7kL/20221210-165526.jpg After the installation https://i.postimg.cc/zV6dHLKQ/connector-with-camera-wires.png This ...

Swap infotainment unit from Composition touch to Composition color. From this https://i.postimg.cc/kRNHv7CS/20210606-081756.jpg to this https://i.postimg.cc/qg2WTxK7/20230527-174453.jpg Easy swap, the new unit was used, but there wasn't any problem. Four screws and the connectors, that's it. https:/...

I made a new picture.




Is this what you mean ?

iichel wrote: ↑Mon Dec 04, 2023 6:25 pm small holes are MQS, medium is MCP2.8, large is MCP6.3

Thanks.

Just to make sure, the types of pins for the BCM connector (the one with the 73 pins) are 000979009 for the small "holes" 000979151 for the medium "holes" 000979242 for the big "holes" Am i right ? https://i.postimg.cc/1zJhGYrm/image.png https://i.postimg.cc/kV6p9sHz/im...

iichel wrote: ↑Thu Nov 30, 2023 11:16 am make a new wire to BCM, to an empty BCM pin with a light channel and assign it as 'position lights' or 'low beam'?

Yeah, this is a very nice option. Thanks

[Interior Ambient light] My car doesn't have any ambient light at all. https://i.postimg.cc/bZwxqN6W/03-artikel24139bild02jpg-a4959495c99052ef.jpg Youtube video about Ambient lights on Octavia MK4 https://youtu.be/G5NjpQy6HKA?si=Z0Txz4vl551WWl6q The ambient lighting, especially on the dashboard and ...

Entry lights front doors [Retrofit] Front doors do not have entry lighting in my car's trim level. In the places of the lights there are plastic covers, one with a reflector. The installation and programming process is relatively simple. https://i.postimg.cc/N54vd6KT/skoda-light.png https://i.postim...

At my 6c the number plate lights are assigned from the "Leuchte25KZL HA60" If is this the same to your car you have to change the adaptation for LED lights ENG124885-ENG115442-Leuchte25KZL HA60-Dimming_AB_25 100 ENG124885-ENG115446-Leuchte25KZL HA60-Dimming_CD_25 0 ENG124885-ENG115447-Leuc...