UK-POLOS.NET - THE VW Polo Forum

@iichel @patil

Finally i got a dongle ODIS Engineering and CB firmware and updated my ABS unit to the supported version and was able to do the long coding ad given by@iichel
62DD4C63422B07C54614326A4256E0820908

Thanks @patil for the guidance on the firmware version and the guidance to update

Talked to Patil few hours back, such a nice person. We discussed a lot and it seems there is a way he can help him. I am very grateful for all the help he has extended to me in this situation. Also i recently became the owner of VAG car and did few things, nothing like legends here but will surely w...

Also i am not sure i can send a PM to Patil. I have sent a PM but its still in my Outbox and doesn't show in Sent Items

Hey Piyush, Your ABS module SW version must be updated to 6R0 907 379 CB (from BN :arrow: CB ), which is the latest firmware. Unfortunately this firmware is not available in public domain. :| It has to be purchased and also need access to ODIS-E or Original VCP to flash it. It is also important to ...

Asked couple of people and it seems they are not aware of how to do. Any pointers from members out of India so that I can contact relevant people.

Also if no one then I might want to go diy way to get vcp and find software and flash or find an abs unit which has higher software version

iichel wrote: ↑Sun Mar 20, 2022 6:09 pm Best to talk to a local expert with vcp or Odis. Not something for the DIY people.

I am not aware of anyone around me who does that. Let me see if I can find out else will see what's next.

Any pointers on how to do that?

iichel wrote: ↑Fri Mar 18, 2022 5:13 pm I've been checking upon the BN firmware on your device seems to only exist with 256mm fronts and either 232mm front discs or 200mm drum brakes

Checked an the 2nd one also didnt work. Can we do something else to make it work? i.e updating the software etc like @patil mentioned earlier

Thanks will let you in 6-7 hours

Tried it didnt work. Coding rejected 31

Many thanks.i see both same or i am I missing something. I will try today and will keep you posted.

And change which 08. I see 2

Yes it is removable so i am reusing it. Many thanks for the explanation

You could start with posting a vcds scan of your current configuration Long coding is this in existing setup with 256mm front disc nd 200mm rear drum 62DD2C63422B07C54614346A4256E0820908 Sunday,06,March,2022,12:42:18:00009 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Versio...

amer6R wrote: ↑Thu Mar 17, 2022 6:18 pm you will need wheel aligment (/ tracking) .

Thanks, i got it. Not sure about wheel bearing casing still. Do i need to change the wheel hub as the brakes could fit in older hub also

amer6R wrote: ↑Thu Mar 17, 2022 6:18 pm you will need wheel aligment (/ tracking) .

Thanks, i got it. Not sure about wheel bearing casing still. Do i need to change the wheel hub as the brakes could fit in older hub also