UK-POLOS.NET - THE VW Polo Forum

I have had both lambda sensors changed on my 1.2TSI CBZB Polo. Only way to fix properly was to install genuine sensors.

Lots of cheap parts at Allegro or srotas24. Or try Ebay also

Where are you located? Finnish car wreckers very often ship internationally. Eg. https://www.varaosahaku.fi/fi-fi/Hae/Os ... -33120719/

Tried ABS coding with VCDS today and unfortunately same result as with OBDeleven. Tried everything: doors closed, doors open, ignition on, engine running, hood open, entered security codes. Each time error 22.

Now I don't know what to try anymore or what to debug. Is it possible that it's related ...

Installed R-line rear bumper adapters (6R6807409 + 6R6807410) today. As I thought they won't fill the whole gap, but that's how VW has designed it I guess. Looks much better now though and the bumper is better supported now. (Screws are missing in the photo below, it started raining) :D
IMG ...

Hey, the error I was getting was just coming from coding attempts. I currently have no error codes but didn't try the correct coding with VCDS yet. Maybe during the weekend or next week. I will post an update when I have tried. Hopefully success.

Question about another topic. So I finally fitted R ...

The Byte10 in your new ABS coding for 288-232 was not correct.


Oh thank you so much this I got wrong. Coding is still not accepted but I am using OBDeleven. Although I am able to enable XDS with it and all other coding and such has been successful so far.

Later this week I will attempt this ...

I seem to remember that the codings on the ABS unit are done with Ignition ON and Engine OFF. ... the new coding will be accepted once you exit diagnostics.

Try to see what happens.


Thank you for the advise. Unfortunately tried this but no luck yet. My left ABS sensor was not connected so I ...

Installing front brake system from Polo 6R GTI. This changes front disc size from 256 to 288mm. Did already physical installation on right side and only after that tried coding this change but my coding is not being accepted: (22) Function cancelled., marginal conditions have not been met

I have ...

Changed my stalks today and cruise control system is back online!

I had same symptoms and now cruise control has been completely dead for a bit. Just received new part (6Q0953513AL) today. I will let you know if changing that fixes it when I get to it. Note you might need bit different part depending on your cars configuration.

Haven't posted any pictures of my steering wheel setup yet. Here's the old Passat MFSW (And GTI cluster)
IMG_20230519_115316.jpg

Also CCS is currently dead completely. Ordered part 6Q0953513AL yesterday which will hopefully solve that. At the same time getting rid of the MFI buttons from the ...

It seems that some cars with 256 discs share same caliber (1K0615124) as the ones with 288 discs?

If so then when upgrading from 256 to 288 only thing that needs to be replaced is the caliber carrier and discs? Am I getting it right?

Edit: Will be ok if situation is as mentioned above. Wheel ...

Judging by the brake discs, you haven't driven it a lot lately? ;)


We don't drive the Polo that much but still 100-200 kilometers each week. Some weeks more as sometimes we like to take family trips with the Polo, it just has different atmosphere compared to Octavia IV. 8)

The brake discs ...

Polo after 13 years and 203000 km. It's still OK but body definitely needs some work when you look closer :) Bottom of the car is still holding up extremely well. Just the few dents, small rust and scratches that need to be repaired.

Turtle Wax Color Magic, Jet Black makes big improvement but it's ...

I recommend you check the correct installation of the steering column combi switch (bolt, clamp, T41 connector), and if the installation is correct, replace the levers set with a NEW one.

---
6R 2010 (190.000km)
6Q0953513AL https://www.autodoc.fi/search?keyword=6Q0953513AL , with CCS/without MFI ...