UK-POLOS.NET - THE VW Polo Forum

Thank you scissa. I have checked. what I need is very simple capture of the traffic from MIB quadlock CAN (pin E6 and E12).

### Suitable vehicles

Ideally:

- Polo 6C with factory MIB2
- Golf Mk7
- Passat B8
- Tiguan Mk2
- Another VW with a Delphi MIB2
- Especially useful if the MIB part number ...

Thanks for the reply bro.

You are too kind, you are THE one and only Master Ciclo .

Thanks for the info. Will look into it and will keep you posted

Thank you!!!

Hi everyone,

I’m working on a PQ25 → MQB MIB2 CAN translator for my Polo 6R and I’m looking for some help obtaining the actual MQB CAN frames used for the multifunction steering wheel controls.

The setup is:

* Polo 6R / PQ25
* BCM Max
* MQB MIB2: 3Q0 035 844B
* Teensy 4.1 with two CAN interfaces ...

Thanks for the replies.

The peddle feel the same (not soft) I will check with the car On.

The sad thing is here I am having extreme difficulty in finding a reliable garage. Even the dealer mess up my car and almost bought on fire. So I have been learning and working on it by myself.

Hi masters!

Sorry for digging up the old post.

My car is polo 6r 1.2 TSI 2011.

I’m having some issue with my brake. Like every 2 weeks, I need to top up the fluid even if I’m not driving. I physically checked all the lines but don’t see a physical leak. I read on internet that it might be leaking ...

Hi my friend,

Do you have any info or assistance to swap this and match with my current odometer reading?

Thank you sir, I will try to talk with the local dealer and will come back to you.

Thank you sir, the rain is stopping me to get back to my car. Thanks for all the help.

I am thinking of upgrading the Maxidot Cluster. I’m sure my dealer will not help me at all. Will u to you be able to code for me please? I’m thinking of buying this from AliExpress

“ I just found this on ...

Hi sir, I figured out the situation. The led is working now. I believed when I re-install the door card, I might have forgotten to plug back in the led. My sincere apologies for wasting your time when I could have do my homework.

Please do the following:
- Disconnect the negative battery terminal (30 sec).
- Reconnect it.
- Set the comfort function for all car windows with the window switch on the driver's door (auto up/down - one click).
- With VCDS, Clear All DTCs.
- New BCM coding ...

ciclo wrote: Thu Nov 14, 2024 9:12 pm

It is a simple warning light.

Thank you so much. Will check this weekend sir

ciclo wrote: Thu Nov 14, 2024 9:42 pm Well, I've checked many other 6R RHD CBZ engines and it doesn't have the RHD bit marked.

so I assume that's the correct way to code it.

Noted with thanks sir

When I did. The CCS, it doesn’t give me any error. Should I try to disable and re-enable the CCS to try? I’m just afraid that I could not re-enable the CCS afterwards

Yes sir,

I did it while the battery is attached to the charger so the voltage is 14.4 all the time

Just thinking out loud, may I know where the cables from that blinking red led should be connected to? So I could try to trace it back. Should it be from BCM?