UK-POLOS.NET - THE VW Polo Forum

Just an update about the status. I got the new BCM and both of my original 315MHz keys were able to pair successfully. I'm working on the wiring but my work is taking up most of the time and the weather is also preventing me to work on the car (I have no garage and have to park the car outside). Tha...

Thank you so much for your kind advice and time. I just made the order for 190B I will update once I get it and installed. Thanks for the reminder for the wiring change. I’m currently studying your google documents and trying to re-create the wiring since I read that the harness that you had kindly ...

Will this fit please?

7E0937190Z2F

Or

7E0937190BZ0Q

Thank you

Thank you so much.

I’m going to try to find one. It seems quite rare to find but I will try first.

In the worse case, if I go to the locksmith, with that 500USD quote, will they be able to program a new key for me even if my BCM is 433 and with kessy?

Thanks

Thank you so much for your kind info sir! I really do hope I don’t annoy you all with so many questions. Is there anyway that I could check whether the vehicle has kessy from the VIN number? Thanks. I saw one BCM from Transporter T6 2019 Diesel Manual. It is 7E0937090D. VIN number is WV1ZZZ7HZKH0721...

Thank you.

May I know is there anyway that I could check the BCM whether is defective or not?

VCDS is working (to my knowledge) well. I did all the other retrofits and they are okay. It’s a genuine cable with valid license.

Thanks

Thanks a million!!!
However the BCM I bought is 7H0937090E.
So it should be 315?
But my remote is not able to match.
When I use VCDS, after I click “save” my VCDS stopped responding and need to kill it off and re-run it.

Is there anything that I’m missing please?

Thanks

Thanks for the quick reply. However it’s been a problem getting the 315 BCM. All the sellers selling in eBay not able to answer the question. I bought the BCM ends with E coz based on the team-bro website, it should be 315. But end up it is not. Is there any way that I could identify the MHz before ...

Good day seniors! Thank you so much for all the helpful infos that you all shared. I have a 2011 TSI 1.2 VW polo 6R. Have been upgrading by following all the helps here. So far, - MFSW - Cruse Control - 8K parking aid - Foot wall light - air intake upgrade using other VW parts - spray paint the engi...

iichel wrote: ↑Fri Mar 17, 2023 11:36 pm I don't think 087G will have the software for mqb mfsw backlight

Noted with thanks

Yes exactly So sorry I was busy and didn’t get a chance to try I just got the wiring 5K0971584A. I tried replacing this to my C version. Also no luck with other buttons except for the page left and right plus the “ok” button as volume down. Is there anything that I’m missing out? When I remove T5/5...

you'll probably need to re-route the horn wire from the horn plate to T5/4. Remove T5/5. i don't give you any chance to make the CC work without major changes. for the lighting you need to change the BCM to a model that does support lighting, from 2018 or younger And also T5 you mean by this one? h...

Thanks for the lightning fast reply. I'm trying to past the OBDeleven report here but it said "Forbidden" My BCM is 09 Central Electrics     System description: BCM PQ25 H+3     Software number: 6R0937087G     Software version: 0221     Hardware number: 6R0937087A     Hardware version: H46...

HI all, Thanks for the wonderful information. I'm new here. I have 2011 VW polo 1.2 TSI 6R. I had been a regular no button steering wheel. I bought this MFSW and trying to retrofit to my car https://i.postimg.cc/w33kVnv6/IMG-2950.jpg I followed every steps closely and it was a success. However, I ha...