UK-POLOS.NET - THE VW Polo Forum

Hi

I have an extreme oil leak on my POLO 2013 1.2L TSI CBZB Engine. R4 1.2 TFSI EA111.

Oil leak seems to be between Pressure Pipe 03F 145 673 F and throttle valve adapter 03F 133 062.
I have no DTC fault codes.


The entire region is a very oily mess.

I don't know if its a bad breather pipe, bad ...

Polos really only got CarPlay/ android auto from 2016 onwards , being an older car and without details of your 5F unit it’s near impossible to tell you if adding CarPlay would be possible.


I've retrofitted apple carplay on x2 2014 Polo 6c's before. Their stock unit may not be able to, but I ...

I bought an RCD330 for my 2014 6R, which worked fine with the Canbus adaptor however for some reason it still has the power drain issue even though everything syncs up and the radio "turns off"

Ive tried asking everywhere for a solution but never got a response XD


Get an multimeter and read ...

You can buy an MIB unit which has carplay activated then just swap your unit out.

What is your current unit? Does it have 2 SD card slots or 1?

Not meaning to sound cheap with this suggest (well it is!).

The front sensor looms are looking £100ish on ebay while rear are around £40. I am eyeballing the looms as much as I can through images and I can't spot a difference between the rear or front sensor cables.

The front cables from images ...

I feel like all your questions van be answered with 'you wil have to install every wire yourself'. There is nothing installed up front


Thanks! No issues, just trying to label down which parts I need to purchase myself.



If you want to have a fun time:
- https://uk-polos.net/viewtopic.php?p ...

Hi,

Parking sensor retrofit here. I know there's a tonne of threads available, but didn't find an answer I was looking for. I do not have reverse sensors.

I'm trying to get the job done using 2nd hand OEM from scrap cars, parts look affordable and it looks like I could purchase front/back sensor ...

I recommend going to dealer for stuff like these, they don't tend to be much more expensive than what you find/see on ebay.

I recommend going to dealer for stuff like these, they don't tend to be much more expensive than what you find/see on ebay.

I recommend going to dealer for stuff like these, they don't tend to be much more expensive than what you find/see on ebay.

Well finally sorted out the cluster :) Ended up getting 6C0920940A and a very kind gentlemen came and sorted out the coding. Correct speed output is now shown :D

No errors or faults in VCDS


Hi mate,

I am looking to do the same procedure. I right now have a cluster in KMH and would like to ...