UK-POLOS.NET - THE VW Polo Forum

Buci

I am so said. After all that work. The system is not working as it should. One of the senzors was faulty. I changed it. And after all that time the ops park system is acting weird. VCDS says no errors. How can I explain hmmm. I was sitting in my garage and I put the car in the reverse. Door of ...

Buci

Hy Ciclo..
I did not have the time until today to code with vcds rear parking senzors. But I need help now. One of the 4 senzors is not showing on the screen. The bars are not showing up on the screen for that senzor. Is there a way to find out what is the problem? I moved around the wires in ...

Buci

Any advice where to put rear buzzer? I recevied the original bracket dor pdc modul. Bracket goes on the right side of trunck.

Also the next step is pull the wires for the front senzors. I will go with the right side of the car and behind the glovebox. Is there a rubber gasket/hole from the ...

Buci

Any advice where to put rear buzzer? I recevied the original bracket dor pdc modul. Bracket goes on the right side of trunck.

Also the next step is pull the wires for the front senzors. I will go with the right side of the car and behind the glovebox. Is there a rubber gasket/hole from the ...

Buci

Any advice where to put rear buzzer? I recevied the original bracket dor pdc modul. Bracket goes on the right side of trunck.

Also the next step is pull the wires for the front senzors. I will go with the right side of the car and behind the glovebox. Is there a rubber gasket/hole from the behind ...

Buci

Hy..today is the day that rear bumber is finished. And the wires are setup for 4 senzors (moved around in the connector t12) with a new tool fhat arrived yesterday.

Buci

https://i.imgur.com/HEi8BDG.jpeg

This T6 (3B0) is the coupling I'm referring to... in case your aftermarket wiring harness has it.

From the picture It seems that I have that conncector on the front senzors and it goes through the engine bax and in to the cabine. I was wondering how will I ...

Buci

Presumably, the kit you purchased should also include a connector/coupling to be able removing/installing the bumper, you can also swap the PDC sensor CTRL wires there.
If you want, show us the connector/coupling (T6?).

With the right tools and after studying the diagrams, swapping the wires ...

Buci

As I mentioned before, if the bars aren't displaying correctly on the screen, you need to swap the T3/2 wires that run from the PDC sensors to the PDC module. Just use the logic of figuring out which sensor corresponds to the displayed bars.

'For example':
1234 but they're displayed on the ...

Buci

Since I see you have no experience with VW connectors, you must do this job very meticulously. Do not use improvised tools to remove the terminals or you will end up breaking the connector, ...and the installation is over until 'you install a new connector with terminals'.

It's intriguing that ...

Buci

Buci wrote: Sat Nov 08, 2025 8:00 am
ciclo wrote: Sat Nov 08, 2025 7:51 am The connector you're showing looks like a coupling (aftermarket wiring).
Please show it from the front, or tell me the reference number of that connector so I can tell you which tools to use.

Buci

ciclo wrote: Sat Nov 08, 2025 7:51 am The connector you're showing looks like a coupling (aftermarket wiring).
Please show it from the front, or tell me the reference number of that connector so I can tell you which tools to use.

Buci

ciclo wrote: Sat Nov 08, 2025 7:51 am The connector you're showing looks like a coupling (aftermarket wiring).
Please show it from the front, or tell me the reference number of that connector so I can tell you which tools to use.

Buci

https://i.imgur.com/zslI02Z.png

'With extreme care'

Gently press the terminal tab. There are normally two travels.
It should come out relatively easily.

If you find yourself pulling the wire too hard, you're doing something wrong.

When reinserting the wires, first check that the tab is at ...

Buci

Yes, it's recent information.
We have to wait for Patil to kindly carry out the checks before we know what to do.

Please read our conversation: :arrow: https://uk-polos.net/viewtopic.php?p=609237#p609237

So we wait. Tomorrow is a weekend. I am driling the holes in the rear bumper. I am also ...

UK-POLOS.NET - THE VW Polo Forum

Search found 105 matches

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors

Re: Parking Sensors