UK-POLOS.NET - THE VW Polo Forum

Lamp diagnosis works for all types of light bulbs. It depends on the coding and the dataset (parametry) established at the factory for the lighting configuration of the vehicle where the BCM is going to be installed. The parameters of the BCM PQ25 can be modified with VCP. You can check the operati...

You are a true master. After the coding everything works. I have done installation by your instructions at the beginning of the thread with light relay. May I have a few more questions, please? - I turned on lamp diagnostic for all of the bulbs. Is it really working even for classical bulbs ? - I ha...

Yes, there are endless possibilities for errors :D I have installed new RLS sensor at it works. Now I have done all the electric installation except reverse lights. And almost everything works except DRLS and high beam (but flash works). AUTO switch - same as in 0 position. When I cover the sensor n...

I thought they are interchangeable. Every shop have them as compatible, but may be they are only backward compatible with older revisions not in opposite direction. Wiring should be ok, I tested everything with multimeter and insulation tester. So I have ordered a new one with AH revision and I will...

I made some progress with installation. I created all the wirings and plug it into bcm, fusebox, light switch, etc. I have double checked everything, but I'm stuck with this issue: Address 09: Cent. Elect. (J519) Labels: None Part No SW: 7E0 937 090 HW: 7E0 937 090 Component: BCM PQ25 Max4 X80 0733 ...

enable 61 in installation list, set the coding of the module to all 00, and then remove it again from gateway list. that will clear the errors for the BEM Thank you! It does the trick. I forgot to check the coding of this module. It does not allow me to set 00 everywhere, but there were combobox wi...

Hello Ciclo the Lightbringer, I recently bought Multivan T5 with manual light switch and it is a nightmare (I already run out of battery few times). I read this thread a few times and I think I know what to do. But please would you be so kind and help me with coding a bit ? My current situation is t...