UK-POLOS.NET - THE VW Polo Forum

I found it!!
Had to check byte 23 bit 0 also: alternative voltage supply for highbeam
The only thing that doesn’t work is the homecoming lights if I put the ignition off the lights go of directly
But the high beams where priority

Doesn’t work sadly I see you put bit 5 on but that only gives me a warning light on the dashboard I previously with the old lightswitch coded cominghome when you pull the highbeam stalk I thought maybe that’s the problem but can’t get in the adaptation for that anymore probably because that lightswi...

Here is my full scan I can’t get the high beams to work flash works perfect so I don’t know what’s wrong the coding in byte 18 bit 5 only gives me an yellow light on my dash but doesn’t do anything my car has oem xenon Monday,04,March,2024,14:23:10:00009 VCDS -- Windows Based VAG/VAS Emulator Runnin...

I think I found it I didn’t check light assist in the bcm coding so auto lights work now the only thing that doesn’t work right now is the high beams. They work in flash mode when you pull the stalk towards you but not in the constantly on mode. I already saw something on the internet about: Check 0...

Hey,
I don’t know if this post is still active
But I just did the retro fit and build my own wiring loom and did the coding.
But the auto headlights won’t come on
Leaving home works when it’s dark so the sensor works but with the ignition on the auto function doesn’t work.
Any ideas?
Thankyou!