UK-POLOS.NET - THE VW Polo Forum

Perhaps it's time for you to meticulously compare the relevant files, make the necessary transplants, see firsthand the work and risks involved in doing these things, and then share it with others for free...?

In the face of adversity, strength and courage.


Yup, i'm on it. Let me know what's ...

Is this what you're looking for?
https://www.drive2.ru/l/583175745765950173/
I haven't tested this program -Vag Dash Editor-. Instrument panels weren't one of my concerns.

---
"24C32-24C64_V2.xlsx"
:arrow: https://docs.google.com/spreadsheets/d/1uxk5hP7MpK8ugAUm08rK9b8mRlWu2Fej/edit?usp ...

Ask the AIs. If you ask the right questions ( prompt ), you'll get the right answers.

If you don't ask the right questions, try again creatively. 👨‍🎓

Note:
AIs or GPT chats know almost everything, except what I know and the important things. 🧙‍♂️😁

Warning:
AIs lie, which is a great part of ...

Hey there,

I have also retrofitted the Amarok cluster to my 1.2 TDI Polo. Did all the adaptions and changes in the eeprom with VDOeditor and manually using some russian spreadsheat I found :lol:

Like gelotus I already have compared many eeprom saves, but to this date wasn't able to find where ...

I usually do it with vdo editor from osotec


Hey iichel, i have fixed everything but the fuel guage. For some reason, it seems to be stuck on using the 45L guage even when i have two sensors enabled everywhere in the EEPROM. If you could send your SW1009 55L EEPROM it would make things easier ...

iichel wrote: Sat Jul 19, 2025 3:09 pm what eeprom is it? 24c32/64 or nec 35xx?

24C64

Hey, I have a Amarok cluster(2H0920971B, SW 1009) which i'm looking to use in my polo. The fuel level reading is completely off, along with the speedometer. Can someone help me with the correct parameters for these two things along with how to turn off power steering warning light? I've tried ...

You can have the amarok cluster but you need to change some parameters in the eeprom like fuel tank size and wheel circumference. Also no power steering warning light.

You can have a polo gti/GT cluster but these don't have a coil light and dpf light.

You can have a seat Toledo TDI cluster which ...

Hi guys, I have got two diesel Polo 6r IND clusters with me. One is a lowline(Red backlight, 24C32) from a 2013 car and the other is a midline(3/4 white display, no eeprom NEC 3524 MCU) from a 2015 car. I was able to get unencrypted data out from both the clusters using an Autel IM608, but for some ...

I did do an autoscan before installing the emulator and the buttons didn't show up in BCM subsystem. When i try to load address 09(central electronics), it takes a few seconds after loading the first 2 subsystems, and then moves on to other subsystems. Almost as if it is trying to read the module ...

Testing phase:

- Remove and isolate (do not cut) the blue/white T12/8 wire from the yellow connector.
- Temporarily remove the Chinese emulator...
- The white and "green" T5/4 wire is intriguing... , from the pictures it seems to be connected to the white and blue wire. Check if it is well ...

Yeah, graaja has also posted a lot of helpful guides on team-bhp maybe it was some misunderstanding in communication. Either way it's cleared now. I also had another question about 12k OPS and PLA 2.0. I understand that PLA requires a different ABS sensors and power steering module, but how about ...

Great! The post i'm referring to is from 2017( https://www.team-bhp.com/forum/diy-do-yourself/185347-polo-gt-tsi-install-oem-bi-xenons-bcm-max-upgrade-edit-6c-rls-auto-dimming-irvm-installed.html ). I dig up this forum for a source on this but couldn't find any. I assumed you might have let someone ...

Hello.

MFSW Coding:
A4FFFF manual gearbox.
A5FFFF automatic gearbox.

The airbag wiring is probably not correct. "00470 - company comfort databus in single wire 011 - open circuit steering"
Better images of all the airbag wiring connection points should be seen. (to the airbag)
As mentioned ...

Hi shakjaq1, welcome.

The 7H0 BCM Max is compatible, no problem. You should keep in mind that wiring adaptation, new codings, etc. are always necessary.

-What is the ref number of the factory BCM from your Vento 2012 IND ?
-What diagnostic tools do you have, ...VCDS, VCP, ODIS, OBD11... ?
-Do ...