UK-POLOS.NET - THE VW Polo Forum

looks like no one does, i could do with knowing this,

www.essexracing.co.uk have some reet bargains on neons!!!

nice one bruv, found this

"if you wanna get to your cigarette lighter wires, grab the unit the cigarette lighter is in, (the small black box thing) pull it downwoods n it unclips ...

i want this for my 98 6n 1.4
http://www.kam-racing.com/product_info. ... cts_id/467
does anyone have any pics with induction kits fitted ? so i have an idea of how they go in,

Tim_GTi wrote:

david burton wrote:I used the feed to the boot light to do the same - the neons were low power so it worked well.

Yeh i'd say that was the best way of going about it,

6N2s have a 9V in the boot also though

is a 6n2 what you got or is that a 9n?

Tim_GTi wrote:

Josh_polo wrote:
Waste of time and they look ****

I'd agree with Josh, they do tend to look a litte tacky. The best thing you can do is upgrade the yellowish celing mounted light for a nice white one

nah i need it to go to the boot to light up the sub n amp

yeah grab the lighter unit pull out and down and it unclips. pull it further and you'll see the wires. Then to reattach it push it in and up then it'll click back. Also to get more room remove the ash tray the same way, except there's clips inside so reach in with your fingers. It's really easy ...

For the money that sub deal is good, with £400 you want to set aside at least £200 for the speakers, are you planning on getting a seperate amp for the speakers also? Or just run them off the headunit?

probly run them off the headunit for now, i think im going to put some 6.5" speakers in the ...

ok mate firstly whip out your stereo. u then gotta leaver off the fascia where your heater controls are with a screwdriver and undo those 4 screws. theres a further two screws holding on the btoom bit that were concealed by the heater bit. then leaver out your hazard warning lightswitch and window ...

does anyone know how to get this off my 98 6n????????????

Tim_GTi wrote:No problem mate, sounds like a plan What kind of budget du have for this?

max probs 400 quid.
i was thinking this sub n amp
http://caraudiosecurity.com/shop/produc ... /8044.html

and have u seen these FLI audio its a sub make of vibe, anygood??

this looks good bruv nice little mod, is it the same for the dials 6n 98+ ???????

No, for 6n 98+ , that the way :
http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=de_en&trurl=http%3a%2f%2fwww.blauertacho.de%2fdoc%2fvw%2fpolo_6n%2fpolo6n%2fumbau_fuer_vw_polo_6n_modell_1998.htm
http ...

this looks good bruv nice little mod, is it the same for the dials 6n 98+ ???????

Yeh you could put them in the shelf, you may want to look at door mounting them. Check out some scrappies see if you can find some doorcards with speaker holes, or just make some yourself?

Components and 6.5" coxials are alot better than 6X9s in my opinion. 6X9s are just gash!!

6.5" speakers are ...

does any one know how to get to the back of the cigarette lighter so i can wire up some LED lights to the 12v??

thanks!

6X9s are not the only answer!!!!!!

I'd get 6.5" coxials or components. To connect simply purchase some speakers cable, and run them from the speakers to the back of the headunit, (preferably under the carpet and behind the dash), you then need to snip the wires which currently run to the OEM ...

i have a 98 6n but it only has speakers on the dash not in the doors
http://i275.photobucket.com/albums/jj287/booli_101/polo-1.jpg
these speakers are 4" can they be replaced by any other 4" speakers?
and due to lack of door speakers, is the only other way to put in new speakers, 6x9's in the ...