UK-POLOS.NET - THE VW Polo Forum

Actually i do have OEM LED units fitted, but that shouldnt make a difference, there should be no power going to them at all when the headlight switch is 0 !

its a standard UK polo mate.

Yes they are on all the time with ignition on, regardless of the headlight switch position.
Are they hard wired in to be ON like the front dipped beam on the 2014 onwards polos?

Hi all

Does anyone know how to turn off the number plate lights?
They are constantly on.

There is no option in VCDS, only side lights via terminal 15 can be unselected.

Thanks

Brilliant thanks mate, just what I needed!

Im not worried about the DRL dimming function, so pin 10 to pin 10 will do me just fine
Do I need to wire up both pins for the LED module to function? So 10->10 and 10->12?

Its a quickfix and easy installation, not going full OEM with BCM etc.

Retrofitting 6C LED Headlights on 6R So for the 10pin to 14 pin adaptors, looking to wire the DRL's manually. On the 14 pin on the 6C: Pin 10 goes to t46b/43 on J519 Pin 12 goes to t46b/22 on J519 Does anyone know if the output from the J519 is 12v for each of the pins above This is so that I can pr...

The tensioner pulley bolt goes in from behind the bracket and is easy to replace
Just get a new bolt and new pulley, 10 minute job.

Did you get any more info on this

Do you know what output is provided by bcm to the heated seat module? Is it +12v to activate it?

Just wondering if i can still use the heated seats without connecting and activating the bcm

Great!
Any tips you can provide for wiring the Audi seats, using Kufatec loom in a 6R?

thanks!
How did you wire in rear heated seats?!

Does anyone know the difference between 6r0959772A and 6r0959772D ?
Both are valid part number, A being fitted to 6R and D to 6C

Retrofitting Audi heated seats to 6R and just trying to figure out the difference and which is the best module to use.
Audi use D version throughout the A1.

So the area for the fog there seems to be a cap over the hole. Can that cap not be removed ?

Would you be able to check this out on your set please?
Then we know that all units are DRL/FOG enabled from factory

There seems to be a area for the Fog light too
Can this not be enabled by removing the rear plastic cap?

Then using the correct H11 bulbholder