Search found 9 matches

by ARTHUR16V
Thu Jan 22, 2009 12:18 pm
Forum: MK4 (6N) Polo - Years 1994-1999
Topic: 4 pin or 7pin?
Replies: 2
Views: 743

Re: 4 pin or 7pin?

Hi mate, if you have a head light beam adjuster in your car (compensates for extra people and weight!) then it will be the 7 pin but if you don't then id go for the 4 pin, but just to be sure unplug one and count the pins :D
by ARTHUR16V
Mon Jan 19, 2009 7:36 pm
Forum: MK4 (6N) Polo - Years 1994-1999
Topic: angel eyes
Replies: 2
Views: 1022

Re: angel eyes

Hi mate, ive seen some very similar to the ones your looking for but they were the dark ones, they are FR angel eyes and you can see some on this website - http://www.orange-tuning.com hope this helps :)
by ARTHUR16V
Fri Jan 02, 2009 9:30 am
Forum: MK4 (6N) Polo - Years 1994-1999
Topic: Rear drum removal - Shoe replacment
Replies: 2
Views: 681

Re: Rear drum removal - Shoe replacment

Hi mate, yes you do need to back the shoes off, how you do it is when you have removed your wheel, get a torch and look through your wheel bolt hole and you will see a small flat piece of metal will a hole in, its attached to a spring (its the adjuster), its in the 9 o'clock position i think!
All ...
by ARTHUR16V
Thu Nov 06, 2008 7:56 am
Forum: MK1 and MK2 Polo (86 and 86F) - Years 1975-1989
Topic: Replacement brake pipes
Replies: 3
Views: 1936

Hi mate, im afraid you will have to bend your own because you can't buy them pre-bent! When i did mine i bought a 10m roll of cunifer brake piping, measured the old ones with the aid of a piece of string, cut the piping to length and making sure the ends are filed square and burr free (this gives a ...
by ARTHUR16V
Wed Nov 05, 2008 8:29 pm
Forum: MK3 (86C) / GT / G40 Polo - Years 1990-1994
Topic: Over revving on 16v polo at 2000rpm when still ! HEELLPPP!
Replies: 1
Views: 1691

Mine did the same mate, kept revving up and down (hunting for revs) did the two things you have done and didn't cure it but the third thing to do is change your engine coolant temperature sender, i did and problem solved :D got mine from the dealer, part code 6U0919501B cost just short of £25. Hope ...
by ARTHUR16V
Mon Nov 03, 2008 8:44 pm
Forum: MK4 (6N) Polo - Years 1994-1999
Topic: Aunty Roll Bars ;P
Replies: 7
Views: 1198

Anti roll bar!

Hi mate. I have a 6n polo 1.4 16v and it does have an anti roll bar fitted as standard, im sure all 16v have them not sure if the 1.6 6n models have them too, I would look for one from a scrappers if i were you. Not sure on the fitting side of things im afraid mate. :?
by ARTHUR16V
Mon Nov 03, 2008 8:34 pm
Forum: MK4 (6N) Polo - Years 1994-1999
Topic: throttle body
Replies: 2
Views: 759

Throttle Body

Hi mate i didn't do anything with my lambda probe when i cleaned my TB. I removed the TB and gave it a really good clean with carb cleaner and used a toothbrush to get in all the little bits and pieces.
As for the temp sensor, i didn't drain the coolant but you do suffer some coolant loss, how much ...
by ARTHUR16V
Fri Oct 31, 2008 12:31 pm
Forum: MK4 (6N) Polo - Years 1994-1999
Topic: Are these prices cheap for comma oils...?
Replies: 1
Views: 630

Not sure!

Try Andrew Pages mate they tend to be cheaper and sell comma oils!
by ARTHUR16V
Fri Oct 31, 2008 12:25 pm
Forum: MK4 (6N) Polo - Years 1994-1999
Topic: mk5 rear bulb holders
Replies: 2
Views: 547

Mk 5 bulb holders!

Hi mate, i got some for my car from a scrappers! They look brand new and cost me £7 for the pair. With them been inside the car and hidden away from the elements they stay in 'as new' condition. Happy hunting :)