UK-POLOS.NET - THE VW Polo Forum

I have to admit that it is the best DIY image I have seen in a long time.

Golf 7.5 DCC Project. Installing the rear left body acceleration sender rivet nut. I remove the necessary parts according to erWin (trims, etc), except that I do not remove the left luggage compartment side trim completely since it is possible to remove it from the retaining ring for the rear seat ...

Golf 7.5 DCC Project. DCC unit retainer. Felt strip. https://i.imgur.com/J04cj5A.jpeg 🤔 Let's do an online search... https://i.imgur.com/qCoESTv.jpeg ...in the images of the second-hand parts it is obvious that the felt strip/s is necessary for a correct fit of the DCC unit retainer. I suppose to a...

Test. Adapter for nut riveter (drill). NRA-M06. Video . https://i.imgur.com/cv3i0ob.jpeg In order to install the rear body acceleration sender (G343) of my DCC project, it is necessary to install a rivet nut (M6) in the hole already made in the body. Some time ago I bought an Adapter for this type ...

Tool to remove VW connectors. Video. https://i.imgur.com/qMw9G31.jpeg Normally, VW connectors are easy to remove with a simple screwdriver, but depending on the location of the connector, sometimes it is impossible to use a screwdriver to remove some VW connectors, and other times the connector is ...

WD POLO 6C
https://drive.google.com/file/d/0B2nv91 ... Fo9JXQYHxw

I'm glad to know that everything went well.👌 If I saw an elephant on the side of the road where I live, I would either be dreaming or I would die of fear...😄 I have to say that in the place where I live there is also wildlife transit on the roads, but of medium or small size, such as deer, wild boar...

From the color of the wires and the information provided, it seems like a job related to the infotainment and 'telephony' system, although it could be anything... From the appearance of what is shown, it does not seem like a normal or relatively acceptable botch 🤭, it is a real botch with 0.3 % spen...

It is not usual for accidents/incidents to occur at random, they usually occur due to a combination or sum of circumstances.
I hope everything went well in such circumstances because Ganesh protected you from any obstacle on the road.

Before proceeding with the installation of my DCC project, I was planning to do a deep clean of the front wheel arches and rear torsion axle of our Golf (dust and other debris), but if it has to rain, it will rain, I can't put doors/gates to heaven so that I can continue with my fun DCC project. :) ...

Nice home. 8) In the unfortunate place where I was accidentally born and according to the current world order of things, to have a perfectly air-conditioned house (with a standard salary and 'being legal') has to be a termite mound. :lol: I used to organize good meetings on the terrace of a chalet w...

Golf 7.5 DCC project. Wiring. Exterior rear area. 'Couplings' for new original wiring harnesses. I also bought these new original rear harnesses. Each side of the new original wiring harnesses is made up of the wires for the electric parking brake, speed sensor and shock absorber valve. To facilita...

Golf 7.5 DCC project. Wiring. Cabin_Trunk interior area. TIUL_T47 DCC unit connector. Previous information. :arrow: https://uk-polos.net/viewtopic.php?p=598638#p598638 No comment. https://i.imgur.com/P0b5V1k.jpeg https://i.imgur.com/A6wdNgw.jpeg https://imgur.com/zcho7Qq.jpeg https://i.imgur.com/aA...

Golf 7.5 DCC Project. Wiring. Engine/Front area. Wheel Arches_Plenum Chamber_TIUL. I bought the DCC original wiring looms for the front wheel arches :arrow: https://uk-polos.net/viewtopic.php?p=597574#p597574, whose main quality is that they are perfectly sealed. The problem is that in addition to ...

Yes, it looks bent.


...and two shock absorbers from different manufacturers on the same axle, it doesn't look good.